Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  1. Home
  2. Tool Talk
  3. Reviews
  4. EDC Bit Ratchets
EDC Bit Ratchets
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • refleks Offline
    refleks
    Posts: 15
    refleks Offline
    refleks
    wrote on last edited by
    #203 Quote Reply

      Update: The Steinwhale bits fit perfectly, like it was made for it. Now it's easy to keep a flat head and phillips on the tool even while it's on your keychain. Kinda wish they included security torx in the set, but I'll take what I can get!

      From top to bottom: Steinwhale, Wiha, Klein, leatherman

      Ironically, although the Wiha double ended bit is shorter than the Klein overall, the shortness is in the middle, not the ends, and is actually just a hair longer than the Klein on the ends.

      This means sometimes a bit extension can use the Klein but not the Wiha despite the wiha being shorter. For example, both ratchets can use any of these bits in the ratcheting portion, but the longer ratchet cannot grab the Wiha bit on the end (and barely grabs the klein, almost enough to not be usable in regular practice but would work in a pinch). The shorter ratchet cannot grab either the Wiha or the Klein. Both can use the leatherman flat bits, but they wobble a lot.

      An ideal 2nd Generation version of these ratchets would have knurling and a deeper well on the end, like the leatherman extension, with a combo of magnet and wire retention. This would provide redundancy in case one retention method fails, and can use all bits, even the Steinwhale (though you will need assistance removing it).

      1 Reply Last reply
      • ReamerPunch Offline
        ReamerPunch
        Global Moderators
        Posts: 12,187
        ReamerPunch Offline
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #204 Quote Reply

          @Blunt Object said:
          What an awesome thread! I put together a miniature tool set, knifeless, fits in a non-elastic mag pouch, Vic Card scissors missing from the picture. Should be flight safe according to our national carrier which I use and who allows scissors up to 6cm. The ratchet is the smallest I've found. Wouldn't bet my life on it, but the extender works as a bitholder/driver on its own and Knipex can be used to turn it if force is needed.

          Great kit! :like:

          1 Reply Last reply
          • ReamerPunch Offline
            ReamerPunch
            Global Moderators
            Posts: 12,187
            ReamerPunch Offline
            ReamerPunch
            Global Moderators
            wrote on last edited by
            #205 Quote Reply

              @refleks said:
              Update: The Steinwhale bits fit perfectly, like it was made for it. Now it's easy to keep a flat head and phillips on the tool even while it's on your keychain. Kinda wish they included security torx in the set, but I'll take what I can get!

              From top to bottom: Steinwhale, Wiha, Klein, leatherman

              Ironically, although the Wiha double ended bit is shorter than the Klein overall, the shortness is in the middle, not the ends, and is actually just a hair longer than the Klein on the ends.

              This means sometimes a bit extension can use the Klein but not the Wiha despite the wiha being shorter. For example, both ratchets can use any of these bits in the ratcheting portion, but the longer ratchet cannot grab the Wiha bit on the end (and barely grabs the klein, almost enough to not be usable in regular practice but would work in a pinch). The shorter ratchet cannot grab either the Wiha or the Klein. Both can use the leatherman flat bits, but they wobble a lot.

              An ideal 2nd Generation version of these ratchets would have knurling and a deeper well on the end, like the leatherman extension, with a combo of magnet and wire retention. This would provide redundancy in case one retention method fails, and can use all bits, even the Steinwhale (though you will need assistance removing it).

              Those bits are handy indeed. :like:
              It's a shame that the people who sell ratchets don't put that much thought into what would fit the best in their tools.

              1 Reply Last reply
              • ReamerPunch Offline
                ReamerPunch
                Global Moderators
                Posts: 12,187
                ReamerPunch Offline
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #206 Quote Reply

                  Just an FYI, I'm still around, but my laptop and phone started dying at the same time. I'm looking into solutions, but may end up just getting a new one.
                  I hope to start making reviews again soon. :cheers:

                  1 Reply Last reply
                  • m47mu74nt Offline
                    m47mu74nt
                    Posts: 2,520
                    m47mu74nt Offline
                    m47mu74nt
                    wrote on last edited by
                    #207 Quote Reply

                      @m47mu74nt said:
                      I did pull the trigger on the DR54, and on cheapos, will see

                      Cheapos were just some kind of stubby 1/4 hex and square drivers without anything fancy, might have a use for them I'll see.
                      Still waiting for the DR54 though

                      1 Reply Last reply
                      • m47mu74nt Offline
                        m47mu74nt
                        Posts: 2,520
                        m47mu74nt Offline
                        m47mu74nt
                        wrote on last edited by
                        #208 Quote Reply

                          @ReamerPunch said:
                          Just an FYI, I'm still around, but my laptop and phone started dying at the same time. I'm looking into solutions, but may end up just getting a new one.
                          I hope to start making reviews again soon. :cheers:

                          Don't worry, we'll wait for you :drink:

                          1 Reply Last reply
                          • styx Offline
                            styx
                            Posts: 9,851
                            styx Offline
                            styx
                            wrote on last edited by
                            #209 Quote Reply

                              Hopefully I'll soon be able to contribute with a review of the Bosh ratchet from the 2607017160 set

                              1 Reply Last reply
                              • Blunt Object Offline
                                Blunt Object
                                Posts: 229
                                Blunt Object Offline
                                Blunt Object
                                wrote on last edited by
                                #210 Quote Reply

                                  That's the one I have. Works fine!

                                  1 Reply Last reply
                                  • Mike Offline
                                    Mike
                                    Posts: 1,660
                                    Mike Offline
                                    Mike
                                    wrote on last edited by Mike
                                    #211 Quote Reply

                                      Cheap from Harbor Freight at $2.99. PITTSBURGH - Ratcheting Right Angle Multi-Bit Screwdriver Set, 8 Piece. SKU #92630

                                      I got one, works fine for my needs. Not very refined, not real heavy duty either, but gets the job done for what I need it for.
                                      Mike
                                      *Note: Not my pictures, linked from HF.

                                      1 Reply Last reply
                                      • ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        Posts: 12,187
                                        ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        wrote on last edited by ReamerPunch
                                        #212 Quote Reply

                                          Ratchets reviewed so far

                                          1 Reply Last reply
                                          • ReamerPunch Offline
                                            ReamerPunch
                                            Global Moderators
                                            Posts: 12,187
                                            ReamerPunch Offline
                                            ReamerPunch
                                            Global Moderators
                                            wrote on last edited by ReamerPunch
                                            #213 Quote Reply

                                              So much news on this topic....
                                              The tiny 711L ratchet is much cheaper now.
                                              I got it for $29 USD, now it's $20.
                                              Or a set with 8 bits for $24.

                                              And there is a 4mm bit micro ratchet! :ahhh

                                              LaBear has a folding bit ratchet, with bit set.
                                              I hated the flat LaBear ratchet but this looks quite ok.
                                              Four colours too.

                                              Screenshot_20241126_030709_Amazon Shopping.jpg

                                              Screenshot_20241126_030110_Amazon Shopping.jpg

                                              Screenshot_20241126_030323_Amazon Shopping.jpg

                                              Screenshot_20241126_030301_Amazon Shopping.jpg

                                              1 Reply Last reply
                                              • ReamerPunch Offline
                                                ReamerPunch
                                                Global Moderators
                                                Posts: 12,187
                                                ReamerPunch Offline
                                                ReamerPunch
                                                Global Moderators
                                                wrote on last edited by ReamerPunch
                                                #214 Quote Reply

                                                  Prestacycle sells the T-handle Pro for $23 with the extension and 12 bits. This (plus wallet) was $40. Ratchet and extension alone were $30.
                                                  I think it's the same one, but it may be a slightly shorter version? :think:
                                                  Still, great value.

                                                  Screenshot_20241126_030023_Amazon Shopping.jpg

                                                  1 Reply Last reply
                                                  • ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    Posts: 12,187
                                                    ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #215 Quote Reply

                                                      I saw this ratchet thing. Pass-through design, so not everyone will like it. No bit retention from what I read. Still, inexpensive, and holds two bits, and has a glass-breaker tip. Looks funky, too.

                                                      Screenshot_20241126_030149_Amazon Shopping.jpg

                                                      1 Reply Last reply
                                                      • ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        Posts: 12,187
                                                        ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        wrote on last edited by
                                                        #216 Quote Reply

                                                          Also, I saw a Milwaukee bit ratchet that looks like the Klein one, but the Milwaukee one has a carabiner in the finger loop. Not bad. Not available in Amazon. Might be a local US deal. It even comes with the same bits as the Klein, but the bit holder is set-up for edc too.

                                                          Screenshot_20241126_031656_Google.jpg

                                                          1 Reply Last reply
                                                          • ReamerPunch Offline
                                                            ReamerPunch
                                                            Global Moderators
                                                            Posts: 12,187
                                                            ReamerPunch Offline
                                                            ReamerPunch
                                                            Global Moderators
                                                            wrote on last edited by
                                                            #217 Quote Reply

                                                              The Klein ratchet comes in black now. :like:

                                                              Screenshot_20241126_122634_Amazon Shopping.jpg

                                                              1 Reply Last reply
                                                              • ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                Posts: 12,187
                                                                ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                wrote on last edited by
                                                                #218 Quote Reply

                                                                  And the Ares comes in black too! :like:
                                                                  Branded Sundry, from Amazon Japan, comes with sockets and the modular bit holder that the Vessel mini ratchet came with. :cheers:

                                                                  20241130_133904.jpg

                                                                  1 Reply Last reply
                                                                  • ReamerPunch Offline
                                                                    ReamerPunch
                                                                    Global Moderators
                                                                    Posts: 12,187
                                                                    ReamerPunch Offline
                                                                    ReamerPunch
                                                                    Global Moderators
                                                                    wrote on last edited by
                                                                    #219 Quote Reply

                                                                      Hazet 2021SA advent Calendar ratchet set!

                                                                      20250123_111726.jpg

                                                                      1 Reply Last reply
                                                                      • ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        Posts: 12,187
                                                                        ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        wrote on last edited by ReamerPunch
                                                                        #220 Quote Reply

                                                                          BGS 115 Special Bit Ratchet

                                                                          (Can also be found branded by Astro)

                                                                          Weight: 37g
                                                                          Length: 99mm
                                                                          Head width: 14mm
                                                                          Head clearance with standard bit: 26mm (adds 1mm)
                                                                          Teeth count: 16
                                                                          Minimum swing arc: 22.5°
                                                                          Bit retention: none
                                                                          In-line driver: no
                                                                          Bit material: Chromium-Vanadium steel
                                                                          Handle material: Chromium-Vanadium steel
                                                                          Price: $17 with 4 ultra-stubby bits

                                                                          Accessories
                                                                          The BGS 115 comes with four ultra-stubby bits that have ring springs on them.
                                                                          The packaging includes a plastic sleeve and a holder for the ratchet and bits. This could be used as a carrying case, but it is quite large and negates the slim profile of the ratchet.

                                                                          Dimensions
                                                                          The BGS is the flattest ratchet yet, at only 4.5mm. Like the SK11 ratchet, the BGS has a very narrow head, at only 14mm. It is 99m long, so about average. It only weighs 37g.

                                                                          The bits are only 11mm long, and would have provided the lowest clearance yet, but the ratchet adds 1mm. The SK11 ultra-stubby bits are 12mm long, but the ratchet adds no length to them, so it has the same clearance as the BGS.


                                                                          Bottom right: 711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, Prestacycle

                                                                          Teeth count
                                                                          The BGS has only 16 teeth, which is rather low. The ratchet requires some space for it to be able to swing and engage the next tooth, to be able to turn a fastener.

                                                                          Bit retention
                                                                          The BGS ratchet has no retention. No spring, no ball bearing, no magnet, nothing. That’s why the bits themselves have ring springs.

                                                                          Bit compatibility
                                                                          The bit compatibility is extremely high, thanks to the almost pass-through head.
                                                                          It is interesting that the bits it comes with are extremely difficult to insert in the ratchet. Inserting a bit required pliers. This is a first, especially considering that these proprietary bits were made to be used with this ratchet.
                                                                          Even bits with ball bearing retention cannot be used easily, because the ball bearing will not engage the ratchet head, due to the latter being extremely shallow.

                                                                          The bits themselves have very low compatibility with every ratchet, including the one they come with. Because of the ring spring being on the bits, they are difficult to insert in any ratchet, and they are extremely short, so in most ratchets they will just sink in and be hard to remove. And their springs will only make things harder.

                                                                          Switch action
                                                                          The BGS has an oversized and exposed pawl, which acts as its own switch. It has excellent detent, and does not change direction when accidentally bumped into something.

                                                                          Ease of use
                                                                          The BGS is an ultra-low-profile ratchet, and has the flattest and narrowest head so far. It also adds 1mm to the inserted bit's clearance. It only has 16 teeth, so this still needs some room to move around.
                                                                          The ratchet is long enough for a four-finger grip. Its ratcheting gear has exposed teeth, so it can be used as a knurled finger wheel, for loose fasteners.
                                                                          The ratchet has a lanyard hole, so if needed, it can be tethered and prevent misplacement or being dropped.
                                                                          It is not easy to use the bits that came with it. They are very reluctant to be inserted in the ratchet due to the ring springs, and they are tiny, so not easy to manipulate.
                                                                          Using standard bits, or pretty much any bits other than the four it comes with is not easy. The ratchet has no retention, so bits will just fall out.

                                                                          Top left: LaBear, Vessel, Anex, Mulwark, SK11, BGS

                                                                          Construction Quality
                                                                          The BGS is a sandwich ratchet, with two metal plates holding the internals in place.
                                                                          The ratcheting gear has no wobble in the frame. The teeth are perfectly machined and the pawl has excellent fitting with the gear. The pawl has great detent. The lanyard hole edges are rounded off and will not damage cords.
                                                                          The corners are chamfered and the ratchet has no hotspots. There are no gaps between the plates and hard plastic insert.

                                                                          Portability
                                                                          The BGS 115 is extremely thin and flat and will sit unnoticed in a pocket. No need for multi-tool pouch side-sleeves, edc pouches, and pen sleeves. This can tuck into any thin, flat pocket, along with other gear, and take extremely little space. This of course means that it may just slide out of elastic loops where other ratchets would stay in place.
                                                                          Thanks to the generous lanyard hole, it can also be clipped to a bag or pack with a quick-release clip or carabiner, or even tethered with a cord to keep it from dropping.

                                                                          Value
                                                                          At $17 with only 4 hard-to-use bits and no nice way to carry them, this feels like a mixed bag. The ratchet itself has some nice features, but offers no retention. It will definitely disappear in a pocket or wallet, and it can be used with standard bits, but honestly, the SK11 offers the same bit clearance and has none of the BGS downsides.

                                                                          Conclusion
                                                                          The BGS 115 is certainly interesting, especially compared to the SK11. They both have a lanyard hole, a knurled finger wheel, are well-made, thin and flat. The BGS is even thinner, so it will occupy even less space.
                                                                          The big difference is that the SK11 ratchet is easy to use. It has a retention spring for the bits, so it can be used with pretty much any ¼” bit. And it can be found with an ultra-stubby bit kit with 10 bits in a bit holder with a carrying loop. In contrast, the BGS has no retention. Using standard bits will require a modification to keep them in place. The BGS bits do have built-in retention, but they are impossible to insert into the BGS ratchet with just fingers. Even if they were easy to use, the ratchet only comes with four. There is an additional bit kit with 12 more bits, but this will cost an additional $20 USD, and the bits come loose in a box.

                                                                          The benefit of proprietary bits, if any, is that they will work well with the tool they come with. Well, not in this case. It took an extremely long time to insert a bit into the ratchet, with pliers, after getting my fingertips numb with no progress. Being the thinnest ratchet so far puts the BGS on top of at least one list already, but quite poorly so. If you are indeed looking for a thin ratchet and stubby bits, the SK11 with its bit kit is a much, much better option.

                                                                          Pros
                                                                          -Extremely thin frame.
                                                                          -Knurled finger wheel.
                                                                          -Extremely high bit compatibility.

                                                                          Cons
                                                                          -The ratchet itself has no retention.
                                                                          -The included bits are extremely hard to insert into the ratchet.
                                                                          -Comes with proprietary bits and only four at that.
                                                                          -The proprietary bit kit contains only 12 additional bits and costs $20.
                                                                          -No bit holder.
                                                                          -Only 16 teeth.

                                                                          If you liked this ratchet, help is on the way. Also check out:

                                                                          1 Reply Last reply
                                                                          • ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            Posts: 12,187
                                                                            ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            wrote on last edited by ReamerPunch
                                                                            #221 Quote Reply

                                                                              I'm back! :D
                                                                              I've written a few more reviews. I'll take pictures and post them soon.
                                                                              Pending reviews: 711L mini, Tone mini ratchet, Hazet 2021 advent calendar exclusive, Stanley Fatmax mini ratchet :cheers:


                                                                              711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, Prestacycle

                                                                              1 Reply Last reply
                                                                              • ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                Posts: 12,187
                                                                                ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                wrote on last edited by ReamerPunch
                                                                                #222 Quote Reply

                                                                                  Tone BR bit ratchet

                                                                                  (Toh-neh, not 'tone'; Short for Tonegawa)

                                                                                  Ratchet: BR
                                                                                  Extension: RDBH-065

                                                                                  Weight: 54g or 1.9oz
                                                                                  BRS20C weight: 214g or 7.5oz
                                                                                  BRS20 weight: 249g or 8.8oz

                                                                                  Max torque rating: 60 nm / 44 ft lb
                                                                                  Length: 87mm
                                                                                  Head width: 18mm
                                                                                  Head clearance with standard bit: 27mm (adds 2mm)
                                                                                  Teeth count: 60
                                                                                  Minimum swing arc: 6°
                                                                                  Bit retention: spring
                                                                                  Extension bit retention: magnet
                                                                                  In-line driver: no
                                                                                  Bit material: Chromium-Vanadium steel
                                                                                  Handle material: Chromium-Vanadium steel
                                                                                  Price: $34 with 20 bits, extension, case
                                                                                  Bits:
                                                                                  Phillips 2x#1, 2x#2, 2x#3,
                                                                                  Allen 4, 5, 6 ,8
                                                                                  TamperProof Torx 15, 20, 25, 30, 40
                                                                                  Slotted 5.5, 6, 8
                                                                                  Square socket drive adapter

                                                                                  Accessories
                                                                                  The BRS20 set consists of the ratchet, 20 bits, extension, and plastic case with an integral belt clip.
                                                                                  The BRS20C set consists of the ratchet, twenty bits in two bit holders, an extension, a two-piece drill bit container and an aluminium Tone logo sticker.

                                                                                  Also available are:
                                                                                  BR10S: ratchet, 10 bits in a bit holder and no case
                                                                                  BRS20MBK: ratchet, metallic case with 20 bits, extension, and magnitizer.

                                                                                  The extension is magnetic. The magnet rides on an anvil which slides back and forth in the socket. Inserted bits rest on a step, and the magnet engages. The magnet can be disengaged by pulling it backwards. This helps remove bits, as the magnet is quite strong.
                                                                                  Each bit holder holds ten bits. The bits fit in tightly. The holders have no bit designations but the plastic case does. The bits themselves are marked with their size, and also branded "Tone".

                                                                                  Dimensions
                                                                                  The Tone ratchet shares the same head as the Wera Zyklop mini ratchet, and Prestacycle/Rujoi ratchets but without the T-handle capability.
                                                                                  It is also the same length as the Wera, at 87mm. The head is quite slim, at 18mm. It is also rather chunky for its length, at 54 grams.


                                                                                  Bottom right: 711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, Prestacycle

                                                                                  Teeth Count
                                                                                  With 60 teeth, and thus a 6 degree minimum arc swing, this is well above average. Working in tight spots should not be an issue.

                                                                                  Bit Retention
                                                                                  This has the same spring seen on high-end ratchets, like the Prestacycle, Wera, Topeak, Klein etc. Bits are held in firmly, but can be removed easily, by pushing from the back of the ratchet head.

                                                                                  Bit compatibility
                                                                                  Thanks to the hole in the ratchet slot, this is compatible with many double-ended bits, as long as one end is thin enough to pass through the hole. Leatherman bits fit nicely, and engage the spring properly.

                                                                                  The extension is deep enough to accommodate Leatherman bits and double-ended bits. In addition to this, and unlike most extensions, this can also work with stubby bits. Even though it is deep, the tips are still exposed and will engage their respective screws, and thanks to the feature of the magnet slide, the strong magnet can be disengaged from the stubby bits, making them easy to remove. This makes the extension the best in this thread so far, as usually extensions work well with either double-ended bits, or stubby bits, but not both.


                                                                                  Regular stubby, Steinwhale double-ended stubby, regular bit, double-ended 1" bit, Leatherman bit, regular double-ended bit

                                                                                  Switch action
                                                                                  The switch is also branded 'Tone" and can be operated very easily with a thumb. It is small and unobtrusive, and will not get bumped accidentally.

                                                                                  Ease of use
                                                                                  The Tone has a lot of things going for it, making it very easy to use.
                                                                                  It has a nice, thin head but high teeth count, for those tight spots with limited swing.
                                                                                  There is also a knurled thumb wheel, to make quick work of somewhat loose fasteners. The switch is also easy to turn despite its modest size.
                                                                                  The narrow neck flares out to a bulbous end, making it easy to hold onto with a proper three-finger grip. The logo also offers traction on both sides.

                                                                                  Of course, the nice extension matches the ratchet's high bit compatibility. The sliding magnet is a nice feature and one we have not seen yet. This extension is arguably the best in this thread. It works perfectly with regular bits, Leatherman and standard double-ended bits, regular stubby bits, and the Steinwhale stubby double-ended bits. Truly amazing.
                                                                                  A little detail that was noticed and appreciated straight away is that due to the magnet slide pin, the extension does not roll freely.

                                                                                  Construction Quality
                                                                                  The Tone is very well made. Pretty much everything about it exhibits quality, from the ratcheting head, to the Tone logo on the body. The finish is crisp and consistent throughout, the ratcheting mechanism works perfectly and has a negligible amount of wobble in the frame. The bits are branded "Tone" as well and fit perfectly in their respective screws. The extension has a so far unique feature that has been executed perfectly and the machining and feel of it are excellent.

                                                                                  Portability
                                                                                  Portability was a priority in the design of this ratchet and the sets it comes in. The ratchet is short and will fit nicely in multi-tool pouch side-sleeves, edc pouches, mint tins, and even other ratchet cases. Thanks to the hole in the head, the ratchet can be clipped to other gear with a carabiner or quick-release clip.
                                                                                  The drill bit container the BRS20C set comes in is wonderfully compact. Everything fits in nicely and can be removed very easily. This will fit comfortably in a pocket, pouch, or bag.
                                                                                  The BRS20 case is quite larger than the drill bit container, but still relatively small, and about the same size as other ratchets that come in boxes, like the GreaTalent, Bosch, etc. This case has an integral belt clip so it doesn't have to go in a pocket. The clip has some flex, and it feels sturdy. The lid closes securely so it will not open accidentally.

                                                                                  Value
                                                                                  At $34, either set will be great value for money. The Tone ratchet has many great features and comes in nice, comprehensive, compact sets. The extension is really nice. The bits include Tamperproof Torx and Metric Allen bits.
                                                                                  Even on its own with no case, the ratchet is still a good investment. The Tone RDBH-065 extension goes for about $6 USD and is also an excellent stand-alone purchase.

                                                                                  Conclusion
                                                                                  The Tone BR ratchet is one of the best ratchets we have seen, and this is three-fold.
                                                                                  The ratchet by itself is excellent. 60 teeth, well-made, compact, the hole in the head allows for double-ended bits as well as clipping, knurled wheel, good ergonomics; a wonderful assortment of features.
                                                                                  The sets it comes in are also excellent. Compact, comprehensive bit selection, the best extension we have seen so far, and even a variety of cases.
                                                                                  Lastly, the price makes it an excellent bargain. The Tone ratchet is essentially the same as the Wera Mini Zyklop, apart from the Kraftform handle. But the Wera will cost around $32 and only comes with a square socket adapter, whereas the Tone will cost about the same and come in a set with 20 bits, a great extension, and a case. The Tone ratchet is truly one of the best so far. This is highly recommended, in whichever set you happen to find.
                                                                                  Even if this ratchet does not meet your criteria, the extension is available as a stand-alone piece and is definitely worth it, no matter which bits you have.

                                                                                  Pros
                                                                                  -High quality.
                                                                                  -Comprehensive sets at amazing prices.
                                                                                  -Extremely high bit compatibility.
                                                                                  -BRS20C set comes in an extremely compact case.
                                                                                  -Bit extension has unmatched bit compatibility and is available on its own.

                                                                                  Cons
                                                                                  -An inline driver would have made it just about perfect.
                                                                                  -Possibly a little too short for people with large hands.

                                                                                  If you liked this ratchet, also check out:

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 9
                                                                                  • 10
                                                                                  • 11
                                                                                  • 12
                                                                                  • 13
                                                                                  • 18
                                                                                  • 19
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Reviews
                                                                                  4. EDC Bit Ratchets
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0