Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunchR
    ReamerPunchR
    ReamerPunch
    Global Moderators
    wrote on last edited by ReamerPunch
    #260

    ZoyoSports Mini Ratchet Set

    (Can also be found branded by BMUCP, Deemont, EEEKit, Meghna, Oxxggkao, Tosuod, West Biking)

    Weight: 54g
    Set Weight: 197g
    Length: 92mm
    Head width: 18mm
    Head clearance with standard bit: 27mm (adds 2mm)
    Teeth count: 60
    Minimum swing arc: 6°
    Bit retention: spring
    In-line driver retention: magnet
    Extension bit retention: magnet and locking
    Bit material: S2 steel
    Handle material: S2 steel
    Price: $17 with 10 bits, extension, holder, 2 tire levers, draw-string baggy
    Bits: Phillips 1, Flat 4, Allen 2.5, 3, 4, 5, 6, 8, Torx 25, 30

    Accessories
    The ZoyoSports Mini Ratchet Set comes with 10 bits, a locking extension, 2 tire levers, a plastic caddy that holds everything, and a draw-string baggy.
    The caddy is two pieces of hard plastic, attached with an Allen Chicago screw (screw and post). One piece is the bit and ratchet holder. The bits and ratchet are clipped in place. The Allen #8 position is a bit larger, to accommodate the large bit head. The bit holder part pivots on the other piece, and snaps onto it. The other piece acts as a lid for the bit compartment. It also holds the tire levers on the sides and the ratchet clips onto it.
    The extension has a locking collar. It has to be pulled back for removing a bit. It has some play in the ratchet, but will not fall out.
    The bits are S2 steel and are very well-made.
    The tire levers snap onto the caddy and are identical. One end is tapered and angled to slide under a bike tire, the other end has grooves to hold onto the spokes.
    The draw-string baggy is velour and single-stitched. It has two draw strings. The ratchet set fits fine in it.

    Dimensions
    At 92 mm long, this is about average, and the same length as the Topeak, Giant, etc. The head is 18 mm, like the PrestaCycle ratchet. It is a little heavier than the Topeak, at 54 grams. This is understandable for how much thicker the stem is compared to the much thinner Topeak.


    Bottom right: LaBear Folding, 711L, Jackly, Leatherman, Ares, Wera, Tone, Wiha, Sharden, Bosch, Topeak, Blackburn, Zoyo, Victorinox, CyclingDeal, PrestaCycle

    Teeth Count
    With 60 teeth, the Zoyo ratchet has a minimum swing of 6 degrees. This is well above average, especially for such an inexpensive ratchet.

    Bit Retention
    Bits are held in the ratchet by the same spring found in high-quality ratchets, like the Tone, Wera, Prestacycle, Klein, etc. Retention is firm. The bits cannot be pushed with a finger from the back to aid removal. The ratchet backplate does not curve inwards like on the Wera etc. It is flat, like the Topeak backplate, but it is thicker.
    The inline driver has a magnet. Retention is excellent.
    The extension's retention is excellent and the bits lock properly in it.

    Bit compatibility
    Stubby bits and regular bits with thin ends may be a little harder to remove from the ratchet end.
    The inline driver can also use Leatherman bits perfectly. It is not deep enough for regular double-ended bits.
    The extension cannot use Leatherman bits or double-ended bits, as it is too shallow for them.

    Switch action
    The switch is nice and flat. It protrudes from the frame just enough to be used, but it will not get bumped accidentally. The detent is also excellent.

    Ease of use
    The Zoyo ratchet shares features with similar ratchets. It has 60 teeth, so just 6 degrees of movement to engage the next tooth. A knurled wheel helps make quick work of loose fasteners. The inline driver is always useful for accessing fasteners or simply carrying an extra bit or even extending the ratchet length. The latter is much more apparent here since the inline driver walls are among the thickest so far. The ratchet can also use double-ended bits.
    The ratchet is long enough for a comfortable four-finger grip.
    Of course, it comes with a nice kit that adds more capabilities. A locking extension, ten S2 bits, bike levers.


    Top left: Topeak, Blackburn, PrestaCycle, Zoyo
    Bottom left: Ares, Zoyo, CyclingDeal, PrestaCycle, Blackburn

    Construction Quality
    Unusually high for the price, as far as the metallic components are concerned. Everything is very well-made. The ratchet is machined flawlessly. The ratcheting mechanism is smooth. Bits fit perfectly. The bits themselves are pristine. The extension is also quite nice.

    The caddy is where things start to drop off. The clip that holds the ratchet in place has started to crack, so this will not last. Users will have to improvise some other way to keep the ratchet on the holder, or carry the ratchet separately, though this will negate the idea of the compact, all-inclusive set.

    This is very similar to the Makita/Wurth/Redashe ratchet sets. All three are impossible to find anymore. Like the Zoyo, the clip that held the ratchet seems to have been breaking easily, so these have been discontinued for many years. The holder design seems to have been redesigned for the Zoyo ratchet set. Of course, the Makita/Wurth/Redashe set had the extension and ratchet places switched and lacked the tire levers but did have a pocket clip. It is unfortunate that the caddy was redesigned but the known issue was not solved.

    Portability
    The ratchet by itself is small enough to fit nicely into an edc pouch or multi-tool pouch side-sleeve or even pen sleeve. It also has a hole in the head so it can be clipped to other gear with a carabiner or quick-release clip.
    The caddy is nice and compact, holding everything securely. It will not take up much space in a pocket or bag. It would have been nice if it had a belt clip, or if it came with a belt sheath instead of the draw-string baggy. It would have been even nicer if the clip that holds the ratchet was stronger, because this has already started to crack, so it will not last long.

    An extra bit can be kept in the extension, and another in the inline driver, to increase its usefulness. This can be done with most ratchet sets, but it is much more practical with this one, as it comes with a caddy and not a wallet or case.


    Bottom left: FixIt Sticks, Zoyo, Penggong, Rujoi bike tool, Victorinox ratchet

    If the tire levers were to be removed, and the yokes cut off, it would streamline the shape and make it much flatter.

    The two pieces of the frame are attached by a Chicago screw. One side is a 2.5mm Allen head, the other something between an Allen 2.5 mm and 2 mm. The Chicago screw is free-spinning. It was very reluctant to be removed with Allen bits, possibly due to permanent loctite, and one side had to be drilled off to get the screw removed. Either way, the Chicago screw can be removed (normally or by force) and replaced with a nut and bolt, or even a thin and long enough Chicago screw, so carrying just the bit holder with the ratchet is still possible. Doing this would leave the bit holder with no lid, and the carrying caddy was -apparently- not meant to be disassembled, so this is not recommended. It would have made sense to just be able to remove the screw, but this was not an intended feature or use, so this will not be counted as a con.

    Value
    At $17, this is not bad value for money. The locking extension and bits are just about perfect. The ratchet has features we do not see often for this price. Knurled wheel, inline driver, 60 teeth, good quality. The caddy is another story.

    Conclusion
    This looks like the PrestaCycle and Topeak had a baby. Or if the Topeak started weight-lifting. It is the same length of the Topeak, but thicker, like the PrestaCycle. It has the same head width, spring, bit clearance, and teeth count as the PrestaCycle. It also has an inline driver and a hole in the head.

    Having the caddy be assembled with an Allen Chicago screw that cannot be simply removed is a little strange. The caddy can still be disassembled to have the bit holder with ratchet attached to it, and nothing else, for an extremely pocketable set. In any case, looking at it for what it is, rather than what it is not, this set is not all bad.

    It is rather disappointing that the caddy has been redesigned but retains the most important flaw it had. The clip that holds the ratchet will not last for too long, so users will have to either modify it to hold the ratchet, or carry the ratchet separately. The price reflects what the Zoyo is; similar to the Topeak, PrestaCycle, Blackburn, but not as nice. I really wanted this to be good, but I cannot recommend it knowing the caddy will fail at some point. It is still inexpensive enough to be a fine purchase, considering it costs only $17 for the ratchet, 10 S2 bits, locking extension, and tire levers. If the screw is removed, the bit holder can be removed and used separately, but long-term, it will also separate from the ratchet, so users will have to improvise a solution.

    Pros
    -Inexpensive.
    -Short but robust.
    -60 teeth.
    -Retains features of similar ratchets (inline driver, knurled wheel, hole in head, low bit clearance).

    Cons
    -Caddy clip for ratchet will not hold up to use.
    -Caddy does not have a belt-clip or any carrying feature.
    -Bit retention is a little too firm.

    If you liked this ratchet, also check out:

    1 Reply Last reply
    0
    • G
      G
      gravelmonkey
      wrote on last edited by
      #261

      On the basis of this review I've just bought one of these ZoyoSports sets on AliExpress for US11.53 Delivered, which seemed like reasonable value for money.

      I've had a "KS Tools 911.2010 1/4 inch bit Set, 24 Pieces" since 2022, and been highly impressed so hopefully this ratchet is similar and can live in the car glovebox to save me moving my mini-toolkit between car and house. Again, thanks for all the reviews and pics, really useful!

      1 Reply Last reply
      0
      • z1913Z
        z1913Z
        z1913
        wrote on last edited by
        #262

        @ReamerPunch said:

        I am in the market for a small ratchet so thank you ReamerPunch for all the great reviews here - super helpful!

        Just a supplementary info - Topeak now offers their updated ratchet as a standalone tool. It is made from aluminium and per spec it weights only 15,5g. The max torq is limited to 18Nm (but I guess shoudl be sufficient for most appliacations. In europe it costs about 18EUR.

        https://www.topeak.com/global/en/product/1619-RATCHET-TOOLBAR-Aluminum

        TT2629_main.jpg

        1 Reply Last reply
        0
        • ReamerPunchR
          ReamerPunchR
          ReamerPunch
          Global Moderators
          wrote on last edited by
          #263

          @gravelmonkey said:
          On the basis of this review I've just bought one of these ZoyoSports sets on AliExpress for US11.53 Delivered, which seemed like reasonable value for money.

          I love it when I do that! :cheers:
          That's definitely a more appropriate price for the Zoyo ratchet. I like how stocky it is. Too bad for the holder though.

          1 Reply Last reply
          0
          • ReamerPunchR
            ReamerPunchR
            ReamerPunch
            Global Moderators
            wrote on last edited by
            #264

            @z1913 said:
            I am in the market for a small ratchet so thank you ReamerPunch for all the great reviews here - super helpful!

            Just a supplementary info - Topeak now offers their updated ratchet as a standalone tool. It is made from aluminium and per spec it weights only 15,5g. The max torq is limited to 18Nm

            You are very welcome and thanks! :cheers:
            I'd still go with the original Topeak ratchet. It is 29 grams and rated for 30NM, why sacrifice that much torque for just a few grams? It's already super lightweight. If weight is an issue, go with the CROM or 711L/Signet micro ratchets, or the Railer, it's only 21 grams but still rated for 30NM.
            And the new Topeak design lacks the hole in the head, so it loses the versatility that the original Topeak, CROM, etc have.

            1 Reply Last reply
            0
            • Grant LamontagneG
              Grant LamontagneG
              Grant Lamontagne
              administrators
              wrote on last edited by
              #265

              @ReamerPunch said:

              LaBear Mini Folding Ratchet

              (Can also be found branded by ASA, Astro, B Baosity, Calandis, Chain, Laser, Leefasy, Mycense, Startist)

              Weight: 48g
              Set weight: 78g
              Length folded: 47mm
              Length unfolded: 78mm
              Head width: 18mm
              Head clearance with standard bit: 28mm (adds 3mm)
              Teeth count: 72
              Minimum swing arc: 5°
              Bit retention: magnet
              In-line driver: No
              Bit material: Chrome Vanadium steel
              Handle material: Chrome Vanadium steel
              Price: $16 with 5 bits, bit holder, split ring with tiny chain.
              Bits: Allen 4, 5, 6, Torx 25, 30

              Accessories
              The LaBear Mini Folding Ratchet comes with five standard 1/4" bits, a bit holder with 5 bit positions, and a split ring with a tiny chain attached to the end.

              The bit holder attaches magnetically to the back of the ratchet handle. It also seems to be a friction fit and it feels secure. The bits are held in by friction, with protruding rings of plastic engaging the bit retention notches. The bits have some wobble in the holder, but require some force to be removed, so retention feels adequate.
              The bits are Chrome-Vanadium, and the coating has held up to some use. There are three common size Allen bits, and two Torx bits, so this will require some replacements to function as an edc ratchet.

              Dimensions
              At 78 grams for the ratchet, and five bits in the piggy-back holder, this seems quite good. The bit holder can be removed, should the entire kit feel heavy for a keychain. The ratchet alone is 48 grams, which is much more tolerable on a keychain. It is 47mm when folded, so it really tucks into a small package. The head is 18 mm wide and for 72 teeth, that is just excellent.

              Bottom right: LaBear Folding, 711L, Jackly, Leatherman, Ares, Wera, Tone, Wiha, Sharden, Bosch, Topeak, Blackburn, Zoyo, Victorinox, CyclingDeal, PrestaCycle

              Teeth Count
              At 72 teeth, this has a minimum arc of only 5 degrees. This is almost as good as it gets, and certainly the highest so far for a ratchet this small.

              Bit Retention
              Bits are held in place with a magnet. Retention is firm, so in theory, you could keep an additional bit in the ratchet, since the holder only holds five.

              Bit compatibility
              Stubby bits can be removed easily thanks to the socket being shallower than more ratchets.
              Of course, being this shallow, double-ended bits and Leatherman bits cannot be used.

              Switch action
              This ratchet has the same head as the Wiha and CyclingDeal ratchets, with one notable difference: The switch has been switched to a regular, small switch, similar to those of the PrestaCycle, Topeak, Wera, etc ratchets. This is a nice change. The Wiha and CyclingDeal ratchet switches were quite oversized. This switch is still easy to use, but is tucked away nicely behind the knurled wheel, and does not protrude at all. The detent is great, so it will not change directions accidentally.


              LaBear, Wiha, CyclingDeal

              Ease of use
              The first so far, this is a folding ratchet. As this is a button lock, the ratchet head is locked both in the opened and closed positions.
              Opening and closing the ratchet is very easy, but it is a little too tight, so this cannot be flicked open like a button-lock knife.
              The ratchet head has some play in both positions. It locks firmly when opened. When folded, the magnet that holds the bit holder also keeps the ratchet head against the handle, in addition to it being locked closed as well.

              The ratchet can be used folded for a quick fix. When unfolded, it is a three-finger grip, although the pinky also holds onto it thanks to the chain. There is a knurled wheel for somewhat loose screws. The switch is easy to operate. The head has 72 teeth, so this only requires a clearance of 5 degrees to be able to swing and turn a fastener.

              The bit holder attached with a 1/4" peg into the handle's 1/4" hex hole, so bits fit in the back of the handle perfectly, but this is not to be treated as a bit driver. The sidewalls are plastic, and it will not handle much torque. Also should the plastic become warped, the bit holder will lose the friction fit and only be held in by the magnet.

              The split ring allows this to be attached to keys or other gear, although a clip or carabiner will have to be used for easy removal. Adding a clip or carabiner will increase the length of this, so maybe replace the split ring with a carabiner altogether.

              Of course, this is a folding ratchet, so it should be used lightly. It will not handle the abuse other ratchet will, because of the nature of the folding construction.

              Construction Quality
              The LaBear folding ratchet is a far cry from the LaBear flat ratchet, in a good way. This is a good quality ratchet. The finish is consistent. There are no gaps between scales and spacer. The screws look new and crisp. The ratchet head mirror finish is flawless. The bits are finished nicely and fit their respective fasteners perfectly, and the coating holds up to use. The bit holder holds the bits securely and itself attaches firmly onto the frame.

              One small issue was that the first chain link that attaches to the ratchet end was not perfectly circular. It had been jammed in place instead of being properly threaded through the hole and being able to rotate freely. It would be recommended to replace this for a split ring, that will hold up to more force than a simple crimped chain link.

              Portability
              Arguably its selling point, portability seemed to be the idea behind this. The ratchet folds in two, making it shorter and easier to have on a keychain. It comes with its own keychain set-up and the bit holder also attaches on it, so users can have a few bits quick on hand.
              It would make little sense to have this unfolded to fit in an edc pouch. It certainly can be done, but at the same time, why go that route instead of having a longer, sturdier ratchet in the pouch to begin with? This was designed for attaching to keys or other gear, so stuffing it into a pouch may be inelegant and inefficient.

              Value
              At $16, this is a fine value for money. The head alone would be worth it, as it has 72 teeth and a knurled wheel, features we do not commonly see on ratchets this inexpensive.

              Conclusion
              The LaBear folding ratchet was a breath of fresh air, considering the atrocious LaBear flat ratchet. The folding ratchet is well-made, has features of much more expensive ratchets, comes with a nifty bit holder and five bits, and it also folds in two. Definitely an interesting design, and well-suited for edc, which this thread is investigating. The ratchet also comes in a variety of colours, like most edc gadgets. And it is inexpensive and readily available, at least at the time of this review.

              A few kinks still have to be ironed out, but this is indeed a good option for edc. It works as intended, it is well-made, it is a nice little conversation piece, and it will also make a neat stocking stuffer even for people who are not all that into edc. Recommended.

              Pros
              -72 teeth.
              -True edc set-up
              -Available in multiple colours.
              -Inexpensive.

              Cons
              -Lighter use than fixed-handle ratchets.
              -Split-ring should be clip.
              -Chain link should be eyelet screw/split ring.

              If you liked this ratchet, also check out:

              I have another brand to add to this one- I just got a Ko Konjojo branded one.

              /topic/93938

              Def


              1 Reply Last reply
              0
              • ReamerPunchR
                ReamerPunchR
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #266

                I quite like mine. It is a nice little tool. :cheers:

                1 Reply Last reply
                0
                • G
                  G
                  gravelmonkey
                  wrote on last edited by
                  #267

                  @ReamerPunch said:

                  Rujoi Flex-head bit ratchet

                  Weights
                  Ratchet: 69g
                  Extension: 33g
                  Set: 265g

                  Length: 128mm (The Amazon listing says it is 100mm long. It is not. The seller reassured me it will be corrected).
                  Head width: 18mm
                  Head clearance with standard bit: 27mm (adds 2mm)
                  Teeth count: 60
                  Minimum swing arc: 6°
                  Bit retention: spring detent
                  In-line driver retention: magnet
                  Extension bit retention: magnet
                  Bit material: S2 steel
                  Handle material: Chrome Vanadium steel
                  Price: 40$ with 12 bits, 1/4" square adapter, 3 sockets, extension, and case
                  Bits: Phillips 2, Torx 10/20/25/30, Allen 2/2.5/3/4/5/6/8, 1/4" square adapter
                  Sockets: 8mm, 9mm, 10mm
                  Flex-head positions: 15° increments

                  Accessories
                  The Rujoi Flex-head ratchet comes with twelve S2 steel bits, a square adapter for sockets, three sockets, a long extension, and a hard nylon case.
                  The case is clam-shell with a zipper. One side has a foam insert, which has cut-outs for the ratchet, bits, sockets, and socket adapter. The other side has a mesh pocket that houses the extension. The pocket runs about half the length of the case.

                  Dimensions
                  At 128mm, this is the longest ratchet yet. It may not fit a small edc pouch. This exact head can be found on shorter ratchets. The head is 18mm, which is narrow enough. The head adds 2mm to an inserted bit's clearance. Quite good.

                  Teeth Count
                  The ratchet has 60 teeth. This is on the higher side, and it means the ratchet has a minimum swing arc of only six degrees to engage the next tooth.

                  Bit Retention
                  The ratchet head has a retention spring, which is the same spring found on other high quality ratchets, like the Topeak, Prestacycle, Wera, etc.
                  The in-line driver has a magnet of above average strength.

                  Bit compatibility
                  The ratchet is a nigh-pass-through design, so it works with most double-ended bits. For Leatherman bits, the spring has to engage their retention notches, so the bits do not fall out. Stubby bits are easy to remove, thanks to the hole in the back of the ratchet head. Bits can be pushed out enough for them to disengage the spring.
                  The in-line driver and extension driver are too shallow for double-ended bits. Leatherman bits engage but barely, and have too much flop from side to side to be used effectively. Stubby bits do not sink in but they are not particularly easy to remove.

                  Switch action
                  The switch is short and flat. It rests on a completely flat surface and has excellent detent. It does not get in the way of the flex-head pivot or the knurled wheel.

                  As it is a locking flex-head ratchet, there is also a button. It protrudes 2mm from the frame and is spring-loaded. It is in the shape of a flat mushroom and sinks completely into the frame,with no grinding or jamming.

                  Ease of use
                  As a flex-head ratchet, the Rujoi offers a clear advantage compared to fixed head ratchets. The flex-head is locking and moves in 15° increments. Thank to the various positions of the head, this ratchet can access fasteners in confined spaces that fixed head ratchets could not.

                  This ratchet happens to share its head with the Prestacycle T-handle ratchet. As such, the Rujoi can also accept the extension as a T-handle, and provide additional torque to the in-line driver.

                  As this is 128mm, users with large hands may find it easier to hold and use, compared to other much shorter ratchets, like the Ares, Topeak, or Wiha.

                  With 60 teeth, and a locking flex-head that is only 18mm wide, the Rujoi is very versatile and efficient.

                  Construction Quality
                  The Rujoi is a high quality tool. It is machined flawlessly. All surfaces and edges are crisp. The ratchet mechanism, the flex-head mechanism, the switch, the button, everything moves smoothly and precisely, with excellent tolerances. There are no imperfections, no pitting, no burrs, no unfinished spots. Construction quality is as high as it gets with these.

                  Portability
                  Compared to other ratchets we have seen so far, this is the longest, and it has the longest extension as well. This may interfere with edc pouches. The Rujoi will not fit in pouches and tins other ratchets will. If length is an issue, this may not be the best option.

                  It does come with a nice case, that is not extremely bulky. Of course, the foam insert that holds everything in place leaves a lot of unused space. This can be mitigated by simply making more holes in the insert to accommodate more bits, or just removing the insert completely.

                  Value
                  This set costs $40. Certainly a lot, but also worth it.
                  One of the best ratchet we have seen so far was the Prestacycle T-handle ratchet. It is interesting to compare that to the Rujoi, since they both offer the T-handle configuration, and cost the exact same amount.
                  The Rujoi is first and foremost a locking flex-head ratchet, so this is already a massive advantage.
                  The Rujoi comes with a more versatile case, that can hold much more, and can also be used for anything else. The Prestacycle wallet is much more restrictive. The Prestacycle can be bought with the exact same case as the Rujoi, but then it will cost $10 more.
                  The Rujoi comes with S2 steel bits. The selection is the same as the Prestacycle, but its bits are Chrome-Vanadium.
                  The Rujoi also comes with three sockets and a socket adapter. Not a big advantage, but the Prestacycle did not come with any.
                  And the main feature of the Prestacycle is not sacrificed. The Rujoi can also accept the long extension as a T-handle.
                  The Prestacycle is still one of the best value ratchets we have seen, so the Rujoi is also one by default.

                  Conclusion
                  Comparing the Rujoi to the Prestacycle was unavoidable. They share the same ratchet head, and they both accept long extensions for a T-handle configuration. And the Rujoi has the edge in pretty much all categories compared to the Prestacycle, except length.

                  Even when looking at the Rujoi by itself, it still comes out on top. It is very well-made, with a great bit selection. The bits are made out of S2 steel. It also has a socket adapter and three sockets. It also comes with a long extension and a handy case. It is also a locking flex-head ratchet. This comes in handy for fasteners in awkward places. The Rujoi can also be used with pretty much any double-ended bit. Bits can be removed easily thanks to the hole in the back of the head. This is not a small deal, since we have seen many ratchets struggle with bit removal. The Rujoi adds only 2mm to a bit's clearance, and has a narrow head as well.

                  The Rujoi seems to cover all the bases as far as edc ratchets go. The features go on and on, and the only compromise is the increased length, and a seemingly high -but fair- price compared to others. This is nothing short of impressive. The Rujoi has no real disadvantages to speak of. It is one of the best deals around, putting other ratchets to shame. Highly recommended.

                  Pros
                  -Flex-head feature provides versatility.
                  -High quality.
                  -High number of teeth.
                  -T-handle configuration allows for additional torque.
                  -Nigh pass-though head works with all double-ended bits.
                  -Better grip for people with large hands.
                  -Excellent assortment of S2 steel bits.

                  Cons
                  -Possibly a little too long for edc.

                  If you liked this ratchet, also check out:

                  Couldn't find one of these shipped to the UK so ordered a "KS Tools 918.1590 1/4 Inch Bit Joint Reversible Ratchet Set with Plug Adapter for Sockets, 3-Piece" for $42. The price is a bit steep compared to other fixed head options but I wanted a flexible head.

                  It's got a 60 tooth ratchet, the total length is a tad shorter than the Rujoi, at 117mm.

                  Overall the mechanism is nice and I'm pretty happy.

                  I've got pics but I think I need to upload to an image hosting site first? Visually very similar to the Rujoi, the 1/4 bit to 1/4 drive adapter is good.

                  1 Reply Last reply
                  0
                  • ReamerPunchR
                    ReamerPunchR
                    ReamerPunch
                    Global Moderators
                    wrote on last edited by
                    #268

                    :mail: :like:

                    20250529_150133.jpg

                    1 Reply Last reply
                    0
                    • Antti LammiA
                      Antti LammiA
                      Antti Lammi
                      Global Moderators
                      wrote on last edited by
                      #269

                      That milwaukee ratchet looks like it could be used as fidget toy :like: :like:

                      1 Reply Last reply
                      0
                      • Farmer XF
                        Farmer XF
                        Farmer X
                        wrote on last edited by
                        #270

                        Thank you for these reviews, RP! :hatsoff: I should be purchasing a bit ratchet sooner rather than later. A primary use would be tightening the screws on doorknobs, so a low profile is essential. Such a set wouldn't be something I'd tote around, so a compact case isn't a priority. The Hazet would be at the top of my list if it weren't for the price. Wera and Wiha have some pretty compelling offerings, too. Are there others I should consider?

                        1 Reply Last reply
                        0
                        • ReamerPunchR
                          ReamerPunchR
                          ReamerPunch
                          Global Moderators
                          wrote on last edited by ReamerPunch
                          #271

                          Ratchets reviewed so far

                          1 Reply Last reply
                          0
                          • ReamerPunchR
                            ReamerPunchR
                            ReamerPunch
                            Global Moderators
                            wrote on last edited by
                            #272

                            @Farmer X said:
                            Thank you for these reviews, RP! :hatsoff: I should be purchasing a bit ratchet sooner rather than later. A primary use would be tightening the screws on doorknobs, so a low profile is essential. Such a set wouldn't be something I'd tote around, so a compact case isn't a priority. The Hazet would be at the top of my list if it weren't for the price. Wera and Wiha have some pretty compelling offerings, too. Are there others I should consider?

                            The Wiha won't be low profile, it adds a fair bit to a bit, and comes with standard bits. Wera is good, but expensive. Not low profile either.

                            For low profile , I recommend these:
                            -Kaifnt set with ultra stubby bits. The bits are 15mm long, and it has a very extensive bit set that includes Imperial and Metric Allen bits. And comes in a case.
                            -Mulwark with the two bit holders, it comes with 13 stubby bits and 6 standard bits. No case though.
                            -SK11 ratchet, and SK11 ultra stubby bit set, the bits will be only 12mm long, but no Imperial ones. Just Metric. No case.
                            -Vessel and Anex also come with stubby bits and have useful features.

                            These are all sandwich ratchets. The only full metal ones that comes with stubby bits that I have reviewed so far are the Klein and Titan swivel head, but these are not low profile. They both add quite a lot to a bit's clearance.
                            If regular bits are fine, the Victorinox, Granite, Topeak, Ares, 711L, Giant, etc add no length to a bit. The Prestacycle, Wera, and Tone add only 2mm to a bit's clearance. Do not get the LaBear flat ratchet. It is smurf. And the Ovatt one with the pouch and belt clip is smurf too. The Zoyo is inexpensive and the ratchet is nice enough, but the carrying caddy will break and will not hold the ratchet for long.

                            1 Reply Last reply
                            0
                            • Farmer XF
                              Farmer XF
                              Farmer X
                              wrote on last edited by
                              #273

                              I had a sandwich ratchet a while back, so full metal would be nice. Sounds like Topeak could be a compelling alternative. And you need not worry about me getting the LaBear or Ovatt smurfe. Thank you for suffering through them for the good of MTo! :hatsoff:

                              1 Reply Last reply
                              0
                              • R
                                R
                                refleks
                                wrote on last edited by
                                #274

                                Regarding Blackburn Big Switch, FINALLY someone includes proper knurling on these things. It's a shame it's not around the shaft like leatherman bit extensions, but I'll take it.

                                711L just released a version of the mini ratchet with an end-bit holder deep enough to use double sided bits :woohoo: so leatherman bits and maybe wiha double ended bits should be on the table, BUT this presumably precludes the use of the stubby steinwhale or other ultra-short bits. 😢 I guess it's a tradeoff...

                                https://www.amazon.com/711L-Mini-Ratchet-Wrench-Double-ended/dp/B09T9KY2LG/

                                I have one coming but it won't be here for a week or two. The "knurling" looks pretty much decorative, and these little guys can be slippery, so maybe someday they'll fix that and add leatherman like knurling. Hopefully this deeper bit well option will become the norm and we will see an articulated ratchet version of the stubby, and a long version of the stubby.

                                Titan made a stubby version with a handle bit well also:
                                https://www.amazon.com/dp/B0DVV76J5M

                                Unfortunately this bit well is very shallow -- I just picked one up and it won't accept even the stubby steinwhale double ended bits, only regular 1" bits. Also it only comes in the bit driver version not the socket version. I have mixed feelings because while this is larger than the 711L type ratchets, and won't get into some small places, because the head articulates it kind of works like a sideways ratchet and an inline ratchet too which is nice. What I did was swapped the ball with the 1/4 square drive version, and drilled out the bit well and added another magnet so that I can use the steinwhale double ended bit as well as regular 1" bits, and I just leave the double ended bit in there.

                                1 Reply Last reply
                                0
                                • G
                                  G
                                  gravelmonkey
                                  wrote on last edited by
                                  #275

                                  Might be worth measuring your knobs (stop sniggering at the back!) to see how much clearance you have, I specifically bought the rujoi adjustable head ratchet for getting into awkward spots.

                                  1 Reply Last reply
                                  0
                                  • Farmer XF
                                    Farmer XF
                                    Farmer X
                                    wrote on last edited by
                                    #276

                                    :hatsoff: I will have to do just that at every house and apartment I consider moving into...at least until I can buy a house.

                                    1 Reply Last reply
                                    0
                                    • ReamerPunchR
                                      ReamerPunchR
                                      ReamerPunch
                                      Global Moderators
                                      wrote on last edited by
                                      #277

                                      This looks quite nice, a design I haven't seen before. No brand name though.

                                      1 Reply Last reply
                                      0
                                      • ReamerPunchR
                                        ReamerPunchR
                                        ReamerPunch
                                        Global Moderators
                                        wrote on last edited by ReamerPunch
                                        #278

                                        Stanley Fatmax Mini Ratchet Set

                                        Ratchet weight: 83g or 2.9oz
                                        Set weight: 474g or 16.7oz
                                        Length: 91mm
                                        Head width: 23mm
                                        Head clearance with standard bit: 30mm (adds 5mm)
                                        Teeth count: 48
                                        Minimum swing arc: 7.5°
                                        Bit retention: magnet
                                        Extension bit retention: magnet and locking
                                        In-line driver: no
                                        Bit material: Chromium-Vanadium steel
                                        Handle material: Chromium-Vanadium steel
                                        Price: $44 with 30 bits, locking extension, 7 sockets, case
                                        Bits:
                                        Phillips 1, 2, 3
                                        Allen 3, 4, 5, 6
                                        Torx 8, 10, 15, 20, 25, 27, 30, 40
                                        TamperProof Torx 10, 15, 20, 25, 27, 30, 40
                                        Slotted 4, 4.5, 6.5, 8
                                        Pozidriv 1, 2, 3
                                        Square socker drive adapter
                                        Sockets 6, 7, 8, 10, 11, 12, 13

                                        Accessories
                                        The Stanley Fatmax Mini Ratchet Set comes in a case, with 30 bits, a locking extension, and seven Metric sockets.

                                        The case is plastic, lined with a foam insert with holes for everything. In the lid, there is a picture with all the content specifications. The case closes securely. It more than passes the upside-down test with nothing falling out. The ratchet, sockets, and extension are held in securely. The bits are held very tightly, as if the material starts to stick onto them if left for a long time. They may require wobbling around to get them to pop out of the foam insert. The case is impressively compact, considering the amount of items it holds.

                                        The 30 bits are Chromium-Vanadium. It is an extensive selection, but the big issue is corrosion, as they have developed rust in a few months.

                                        The extension has a magnet and is also locking. It has also developed surface rust on the locking collar.

                                        The 7 sockets are Metric and a socket adapter is included. These have developed some pitting, as has the ratchet.

                                        Dimensions
                                        At 91mm long, this is about average, although quite heavy, at 83g. It adds 5mm to a bit's clearance, and the head is 23mm wide, so a little wider than average there.

                                        Teeth Count
                                        Having 48 teeth seems a little low compared to how wide the ratchet head is. The teeth give a 7.5 degree minimum swing to engage the next tooth and turn a fastener. Not very impressive, but definitely good enough.

                                        Bit Retention
                                        The ratchet has a magnet and the retention is definitely adequate. The extension is locking and also has a magnet, so bits will not fall out.

                                        Bit compatibility
                                        Stubby bits sink in a little too deep. They can still be used, but removing them will not be easy.
                                        Leatherman bits can be used just fine. The ratchet is not deep enough for regular double-ended bits.

                                        Switch action
                                        The switch has good detent in the frame, but has quite a lot of play. It can protrude outwards about a mm. The scalloped area that the switch slides in is much wider than the switch can move. This switch may have been made for another ratchet and used for this one to cut costs.

                                        Ease of use
                                        The case lid can be used as a tray for spare parts. Bits feel glued onto the foam insert and require wobbling around to get them to come out. The ratchet is narrow behind the head, locking the index finger and thumb. The handle is a three-finger grip.
                                        The main pro with this would be the resilience. The ratchet head is thick and definitely heavy duty, certainly more so than almost all other ratchets we have seen so far. This ratchet is among the heaviest and lacks a knurled wheel and an inline driver. The teeth count is slightly above average, with 48 teeth for a minimum swing of 7.5 degrees.

                                        Construction Quality
                                        The finish is consistent throughout but some pitting has developed on the ratchet and sockets. This is minor and nowhere near the level of rust on the extension collar and bits. These bits have arguably the worst finish so far. This set was purchased in April 2023, and many bits are just covered in rust. This is only surface rust and can be removed with little effort, but the issue still remains. The set has been kept in the same storage conditions as many other sets in this thread, with and without cases, and barely any have any rust, let alone this much.

                                        The ratchet switch has quite significant play in the frame. The ratcheting socket has barely any play. The ratchet head is held in place with a C-clip and can be disassembled.

                                        Portability
                                        Though quite heavy, this is short. It will fit in multi-tool pouch side-sleeves and even Altoids tins. It will of course fit in edc pouches but the ratcheting socket protrudes from the frame and may interfere with pouches closing neatly.
                                        The case is definitely compact for what it holds, especially compared to other ratchet sets that come in cases. Still, the case is not small, and the set is among the heaviest yet. It will fit in a cargo pocket but may drag your pants to your ankles.

                                        Value
                                        For $44, this set is not a bad purchase, but a few caveats exist. First and foremost, this has developed rust in the almost two years of sitting in the same tool cabinet with about 30 other ratchet sets, bit sets, screwdrivers with bit storage, etc. Barely any other bit set has developed pitting, let alone rust, and at the extent of the Stanley set.
                                        It is interesting to note that this set is the same as what comes with the Wera Tool Check. If it also had an inline driver, it would match the Toolcheck Plus in utility. Maybe not in longevity, considering the rust, but it will definitely be less expensive. And because it is a set in a case, you can still add a few more bits, or Allen keys, or other small items to it, which cannot be done easily with the Tool Check Plus holder.

                                        Conclusion
                                        The Stanley Fatmax Mini Ratchet set is definitely interesting. It is the most comprehensive set we have seen so far. And it is compact, with its case being essentially the same size as other ratchets sets, like the Bosch, GreaTalent, Kaifnt, while containing much more. It is even smaller than the Inwell ratchet set case, and it also holds more than that as well.

                                        However, this thread aimed to examine edc options, and neither the set nor the ratchet by itself are that impressive when it comes to that. The case and ratchet are among the heaviest so far. The ratchet may be short, but it does not offer many features as other ratchets do, especially when weight is considered. Be it weight, inline drivers, bit compatibility, teeth count, bit clearance, knurled finger wheel, price, and of course corrosion resistance, this will probably not win.

                                        It is not all bad, but for edc, there is no reason to go with this.

                                        Pros
                                        -Comprehensive set, with ratchet, locking extension, 30 bits, 7 sockets
                                        -Case has very little unused space.
                                        -Heavy duty ratchet.

                                        Cons
                                        -Has developed rust and pitting on everything in less than two years.
                                        -High price.
                                        -Bits are not easy to remove from case.
                                        -Head is too wide for how many teeth it has.
                                        -Bits are a little too tightly packed.

                                        If you liked this ratchet, also check out:

                                        1 Reply Last reply
                                        0
                                        • Grant LamontagneG
                                          Grant LamontagneG
                                          Grant Lamontagne
                                          administrators
                                          wrote on last edited by
                                          #279

                                          I don't know that there is a more comprehensive reviewing of mini ratchets to be found anywhere! :ahhh

                                          This is an amazing and exhaustive list!

                                          Def


                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World