Cordless drills, brushless?
-
Bosch is a pretty big name here too. But it's the same for me when I was researching them, occasionally I come across an UK forum and I've never heard of the brands mentioned there. I never knew Panasonic made power tools, always thought they only do TV and microwaves. Some others like Metabo (sounds like a marvel supervillain) are here but not known to the general public.
Going with li-ion is the major reason I'm looking for a new one, my ni-cad dewalt works fine if the battery is charged, but most of the time I had to start with a half dead battery which is not enough if I want to drill more than a few holes.
-
Metabo is one of teh first Manufacturers making electrical power drills (at least in germany).
After always buying cheap hardware store cordless drills and replacing them aftzer 2 years, I decided I will no longer borrow my tools or leave them on site (the main reason I always bought cheap) and bought myself a Metabo cordless drill. It´s one of the "simpler" models, no hammer drill, just drill, but metal gears and gear casing, brush motor, 14,4 V 1,5AH LiIon battery - And a 5 year warranty, including the battery, even in commercial use. This is quite outstanding (especially here in germany where usually 2 year warranty is tops).
You can get spare parts, spare batteries, bigger batteries (3 AH)
That thing was worth every penny.
With non-commercial / or daily usage, I think the brush type engines will last you very long, when using them daily on the job, the brushless motor might be worth teh extra money - AFAIk the delivered power is comparable.
-
I have the Bosch 10.8V screwdriver, 10.8V impact driver, the most basic 18V combi drill and the 18V impact driver, all Blue. At work after getting increasingly pissed of with crap Ryobi tools and batteries I managed to persuade them to get a decent set, and we've got the 18V "Dynamic" series Bosch drill with three 2.6Ah batteries. It's great and wasn't too expensive in the grand scheme of things. It was actually cheaper to get that than 3 1.5Ah Ryobi batteries ???
Anyway, I wouldn't worry too much about brushed/brushless unless you're using it a hell of a lot. All the decent brands have good warranties and you can buy spare parts. I rate Bosch, Makita, Hitachi but would avoid DeWalt as IMO you're paying a premium for the name only.
I have Milwaukee bits for my impact drivers and they're OK but nothing more. The Pozi bits lack definition - where a decent bit will hold on to a screw at most angles, the Milwaukee ones struggle even vertically. Their nut drivers are good though.
As for the Ryobi tools, one that should have been really useful was the angle grinder but you could only manage about one cut per battery with decent thin cutting disks. I've made up a couple of adapters to run them straight off a tractor battery and they work much better. The no load top speed is slightly lower but as soon as you load them up the difference is huge - it actually works pretty well! Good for repairs in the field.
-
Yeah I figured for my use either one is fine. Bosch (specifically HDS180-03) is what I'm looking right now, but haven't decided if I should get it now or wait for any Christmas discounts.
Dewalt is about on par with others price wise here, maybe they have a premium in Europe like Leatherman?
-
@Cupboard said:
I have Milwaukee bits for my impact drivers and they're OK but nothing more. The Pozi bits lack definition - where a decent bit will hold on to a screw at most angles, the Milwaukee ones struggle even vertically. Their nut drivers are good though.are those the Milwaukee "Shockwave" bits? which are totally different from their regular line.
-
The Metabo Salesperson told me their battery angle grinder will cut 8 Meters of 5 mm steel (ST 38) with one Standard battery (I guess with thin discs, but quite impressive nonetheless)
Not too shabby, I´d say - It would be a convenient addition to m Janitor toolbox, but as i use an Angle driver really sparingly, i bring my private 230V one to work when I need one... at least they pay the discs. -
@jzmtl said:
Yeah I figured for my use either one is fine. Bosch (specifically HDS180-03) is what I'm looking right now, but haven't decided if I should get it now or wait for any Christmas discounts.Dewalt is about on par with others price wise here, maybe they have a premium in Europe like Leatherman?
That's the one we have at work, we've only had it about 9 months but it's doing extremely well so far. I've accidentally thrown it on the floor and you wouldn't know.
Dewalt tend to cost a lottle more than Bosch and Makita whilst being a bit less good IMO. I'd choose one over a Ryobi but I'd choose either of the blue ones over the yellow one.
@WhichDawg said:
are those the Milwaukee "Shockwave" bits? which are totally different from their regular line.yes
Despite what I said about Dewalt above, their impact driver bits are an extremely good fit in screws and last well

I haven't had any particular problems with the Milwaukee bits, they just aren't as good as my others for fit.
-
Oh, and the Bosch drill has enough oomf to turn over a 5HP petrol engine for extended periods - useful when I was trying to fix the damned thing!
-
Most pros I see working seem to use Hilti cordless tools; look for the red colour...
When it comes to corded drills they seem to use B@D and some Makita.
Makita tries to sell itself as the professional's choice but I have used some of their angle grinders, small and full size and they did not seem to last longer than the rest. Dust kills them all. Dewalt are not common as they just seem to be more expensive than their sister company B@D for no apparent reason. They are mainly seen as a "designer" product for people who like to show off rather than use their tools.For drills I have a combination of B&D (one must be 40+ years old, all metal construction), Lidls, 15 year old Blackspur with its original battery.... etc
-
The Dewalt 20V group is supposedly going to be taking over their product line in the next few years. They are still going to make 18v stuff and support it but will be slowly phased out of the market. I currently use Dewalt drivers but am getting tired of their hit or miss performance. I will be switching to another brand. I have a Skil corded saw which is fantastic so maybe I will try a Skil drill. I used to work in the home improvement industry as a product rep and will not buy Ryobi due to their crappy build quality.
-
I'm a little confused on the dewalt 20v max, are they all brushless or only some of them?
Local store will have a sale on Bosch CLPK232-181 kit for a good price, although I don't know if I want an impact driver since I don't do any construction.
-
@jzmtl said:
I'm a little confused on the dewalt 20v max, are they all brushless or only some of them?Local store will have a sale on Bosch CLPK232-181 kit for a good price, although I don't know if I want an impact driver since I don't do any construction.
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).
-
Impact drivers are fantastic for many things, there's nothing better for self drilling screws. The Bosch 18V one will undo the wheel nuts on my car (M12, done up as tight as I can do with a 1/2" breaker bar) but that's about its limit.
You do have to be careful not to completely rip small bolts to shreds though - keep going once it's tight and you'll just shear the head off.Edit: oh, and of course the best thing about them is you have all this torque but little to no force on you. Unlike a drill which can wrench itself out of your hand, the impact driver just sits there happily beating the fastener in to submission.
-
@Mr. Whippy said:
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).How often do you use cordless impact drivers on vehicles? I thought about it as a possible use but many of the bolts especially inside engine bay don't have enough clearance to use one.
@Cupboard said:
Impact drivers are fantastic for many things, there's nothing better for self drilling screws. The Bosch 18V one will undo the wheel nuts on my car (M12, done up as tight as I can do with a 1/2" breaker bar) but that's about its limit.That's interesting to hear, a few of the reviews I've read actually said they don't have enough torque to remove lug nuts.
-
@Mr. Whippy said:
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).
How often do you use cordless impact drivers on vehicles? I thought about it as a possible use but many of the bolts especially inside engine bay don't have enough clearance to use one.
Extensions and Ujoint connectors. All it needs to do is break it free. Then use a regular wrench
-
I've never seen a UJ that I'd trust even with an impact driver, let alone a proper impact wrench.
But yes, my impact driver has a longer head and a longer body than our little impact wrench. If I wanted a tool that applied lots of torque in a very small space then I'd definitely buy this chappy:

We have one, it's great.
If I wanted a tool that could be used for drilling holes, driving big screws, and lighter duty bolt driving when away from mains/a compressor then the impact driver's the correct tool. If I wanted something primarily for drilling holes but that could also drive screws then I'd buy a drill. If I wanted to drill big holes and then screw big things in to them, I'd buy both.You can also get cordless impact wrenches that rival decent 1/2" air impact guns for output but they're pretty redundant for us. Most modern tractors will have a compressor that will drive a 1/2" impact wrench in the form of the brake system, so being away from mains isn't so much of an issue.
-
@Cupboard said:
I've never seen a UJ that I'd trust even with an impact driver, let alone a proper impact wrench.But yes, my impact driver has a longer head and a longer body than our little impact wrench. If I wanted a tool that applied lots of torque in a very small space then I'd definitely buy this chappy:
If you are set up to run air tools it would be great, but my big honking electric impact wrench would need 2 ft of clearance to use. :-X
I thought about getting a 1/2" to hex adapter and use it to drive screws when necessary, but it would be heavy as heck and probably shear screw heads off before I can blink.
-
I've thought about getting a 1/2" to hex adapter to use with impact wrench on high torque applications (never actually encountered any), but also wondered which would break first, the adapter or drill bit, and where the shrapnels would end up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

