Cordless drills, brushless?
-
The Metabo Salesperson told me their battery angle grinder will cut 8 Meters of 5 mm steel (ST 38) with one Standard battery (I guess with thin discs, but quite impressive nonetheless)
Not too shabby, I´d say - It would be a convenient addition to m Janitor toolbox, but as i use an Angle driver really sparingly, i bring my private 230V one to work when I need one... at least they pay the discs. -
@jzmtl said:
Yeah I figured for my use either one is fine. Bosch (specifically HDS180-03) is what I'm looking right now, but haven't decided if I should get it now or wait for any Christmas discounts.Dewalt is about on par with others price wise here, maybe they have a premium in Europe like Leatherman?
That's the one we have at work, we've only had it about 9 months but it's doing extremely well so far. I've accidentally thrown it on the floor and you wouldn't know.
Dewalt tend to cost a lottle more than Bosch and Makita whilst being a bit less good IMO. I'd choose one over a Ryobi but I'd choose either of the blue ones over the yellow one.
@WhichDawg said:
are those the Milwaukee "Shockwave" bits? which are totally different from their regular line.yes
Despite what I said about Dewalt above, their impact driver bits are an extremely good fit in screws and last well

I haven't had any particular problems with the Milwaukee bits, they just aren't as good as my others for fit.
-
Oh, and the Bosch drill has enough oomf to turn over a 5HP petrol engine for extended periods - useful when I was trying to fix the damned thing!
-
Most pros I see working seem to use Hilti cordless tools; look for the red colour...
When it comes to corded drills they seem to use B@D and some Makita.
Makita tries to sell itself as the professional's choice but I have used some of their angle grinders, small and full size and they did not seem to last longer than the rest. Dust kills them all. Dewalt are not common as they just seem to be more expensive than their sister company B@D for no apparent reason. They are mainly seen as a "designer" product for people who like to show off rather than use their tools.For drills I have a combination of B&D (one must be 40+ years old, all metal construction), Lidls, 15 year old Blackspur with its original battery.... etc
-
The Dewalt 20V group is supposedly going to be taking over their product line in the next few years. They are still going to make 18v stuff and support it but will be slowly phased out of the market. I currently use Dewalt drivers but am getting tired of their hit or miss performance. I will be switching to another brand. I have a Skil corded saw which is fantastic so maybe I will try a Skil drill. I used to work in the home improvement industry as a product rep and will not buy Ryobi due to their crappy build quality.
-
I'm a little confused on the dewalt 20v max, are they all brushless or only some of them?
Local store will have a sale on Bosch CLPK232-181 kit for a good price, although I don't know if I want an impact driver since I don't do any construction.
-
@jzmtl said:
I'm a little confused on the dewalt 20v max, are they all brushless or only some of them?Local store will have a sale on Bosch CLPK232-181 kit for a good price, although I don't know if I want an impact driver since I don't do any construction.
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).
-
Impact drivers are fantastic for many things, there's nothing better for self drilling screws. The Bosch 18V one will undo the wheel nuts on my car (M12, done up as tight as I can do with a 1/2" breaker bar) but that's about its limit.
You do have to be careful not to completely rip small bolts to shreds though - keep going once it's tight and you'll just shear the head off.Edit: oh, and of course the best thing about them is you have all this torque but little to no force on you. Unlike a drill which can wrench itself out of your hand, the impact driver just sits there happily beating the fastener in to submission.
-
@Mr. Whippy said:
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).How often do you use cordless impact drivers on vehicles? I thought about it as a possible use but many of the bolts especially inside engine bay don't have enough clearance to use one.
@Cupboard said:
Impact drivers are fantastic for many things, there's nothing better for self drilling screws. The Bosch 18V one will undo the wheel nuts on my car (M12, done up as tight as I can do with a 1/2" breaker bar) but that's about its limit.That's interesting to hear, a few of the reviews I've read actually said they don't have enough torque to remove lug nuts.
-
@Mr. Whippy said:
Impact drivers really excel at putting in screws in tough situations without stripping out the head AND in removing really stuck nuts (like lug nuts or nuts exposed to the corrosion of being out in the elements.).
How often do you use cordless impact drivers on vehicles? I thought about it as a possible use but many of the bolts especially inside engine bay don't have enough clearance to use one.
Extensions and Ujoint connectors. All it needs to do is break it free. Then use a regular wrench
-
I've never seen a UJ that I'd trust even with an impact driver, let alone a proper impact wrench.
But yes, my impact driver has a longer head and a longer body than our little impact wrench. If I wanted a tool that applied lots of torque in a very small space then I'd definitely buy this chappy:

We have one, it's great.
If I wanted a tool that could be used for drilling holes, driving big screws, and lighter duty bolt driving when away from mains/a compressor then the impact driver's the correct tool. If I wanted something primarily for drilling holes but that could also drive screws then I'd buy a drill. If I wanted to drill big holes and then screw big things in to them, I'd buy both.You can also get cordless impact wrenches that rival decent 1/2" air impact guns for output but they're pretty redundant for us. Most modern tractors will have a compressor that will drive a 1/2" impact wrench in the form of the brake system, so being away from mains isn't so much of an issue.
-
@Cupboard said:
I've never seen a UJ that I'd trust even with an impact driver, let alone a proper impact wrench.But yes, my impact driver has a longer head and a longer body than our little impact wrench. If I wanted a tool that applied lots of torque in a very small space then I'd definitely buy this chappy:
If you are set up to run air tools it would be great, but my big honking electric impact wrench would need 2 ft of clearance to use. :-X
I thought about getting a 1/2" to hex adapter and use it to drive screws when necessary, but it would be heavy as heck and probably shear screw heads off before I can blink.
-
I've thought about getting a 1/2" to hex adapter to use with impact wrench on high torque applications (never actually encountered any), but also wondered which would break first, the adapter or drill bit, and where the shrapnels would end up.
-
When I've used bits/sockets not designed for impact tools, the drivers/sockets often fail after a number of uses. Screws fail at different rates, but I have had the worst luck with zinc coated screws shearing off, right where the straight shaft meets the threads.
When we were putting slides in the cabinets, I was shearing off Phillips bits at a rate of one bit every 2 drawers (about 20 screws).
-
Well it's done, local store had a Bosch 18v drill/impact driver set for a really good price, so I picked one up.
Very impressed so far, both the drill AND the battery are smaller/lighter than 14.4v nicad dewalt, and the motor feels smoother. Brake is less harsh too, a quick wind down instead of the CLUNK on dewalt. Going to put up two car shelters in a month so there are going to be a lot screws to turn.
Wonder if I can sell the dewalt on craigslist.
-
Make mine brushless , less to go wrong , a bit shorter in overall length , better run time on batt's , longer service life on tools . Lots of nice new toys comming out . Milwaukee has some new product , that if I hadn't tried , I wouldn't believe .
The thing thats screwing me up now , is that I'm using two Metabo chargers , one Hilti charger , a Milwaukee M12 , and an M18 . Basically , I have a milk crate filled with nothing but batts. and chargers . Lest we forget the , charger for the paslode nail guns .
To make matters worse , I want a Festool C12 , their 15 V. impact , and the new cordless Carvex Jigsaw . I also have a jones for the new Senco cordless nailers ( no more stinky fuel , and no ramp up time )
Chris
-
Yeah the brushless are kinda expensive right now, just a drill alone cost way more than what I paid for the kit. I figure by the time batteries die on this, they should come down in price and I'll switch over.
-
Tried them out today, very impressive. While the drill certainly has enough torque to drive 3.5" screws (biggest I have) all the way into wood and take them out again, bit slippage is a problem (and will strip both bit and screw fast). The impact driver however will hammer them in or out pretty effortlessly, no rotational strain on wrist as well. It it LOUD though, ear plugs highly recommended.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

