Chevy Blazers
-
Chevy Trucks are all I personally have ever owned my wife had a Ford Probe when we first got married but now shes got a truck as well :D
-
@Poncho65 said:
Chevy Trucks are all I personally have ever owned my wife had a Ford Probe when we first got married but now shes got a truck as well :DSo I guess it's safe to assume Chevy trucks are pretty reliable :D
Open question to anyone...do the two door Jimmys/Blazers have a backseat also or is there just a backseat on the 4 door versions?
-
I have had 2 Blazers. The first I got when I was 17. It was a 1972 with a 350 4 speed. That truck took a lot of abuse and kept on going. :D
The second blazer was a 93 4 door with the 4.3. Good ride and would get about 20mpg highway. Had to replace a fuel pump and had problems with the anti lock brakes. I got rid of it because I wanted to go back to a pickup.
I also had a 2002 S10 pickup with the 4.3. I had it about 4 years and put 60,000 miles on it. Only problem was had to replace front brake pads. Sold it last summer. Nice truck. -
The two door models do have back seats.
Def
-
@Defender said:
I'm not entirely certain- it's possible, but I've personally never seen one. I have seen some Fords with three on the tree, so I'd lean towards the Bronco for that one. Still, it's likely that Chevy had one as well.Def
Manual column shift was standard in 1966 - 1977, but was not offered after that. 1978-1996 had h-pattern floor shift.
The early ones are easy to convert to floor with a Hurst shifter kit. I have one in my '67, and would never consider going back to the column shift.
-
Wow, lots of Chevy owners/fans here :o
Both cars I've owned had shifting on the column and that's what I'm comfortable with. My moms car has the shifter on the floor and I've got no problem driving it after about 10 minutes, same with the trucks at work...so where the shifter is isn't going to be a problem.
Def, Are the two door models any shorter than the four door models? It's hard to visualize without actually seeing them in person...this whole week I'm going to keep my eyes peeled while I'm out for Blazers :D
Another open question; How easy is it to mod these Chevys? Like If I wanted to put a spotlight on one or a new stereo system...would I run into any weird problems?
-
@Corrugated said:
So I guess it's safe to assume Chevy trucks are pretty reliable :DAmerican car manufacturers have had trouble competing with European and Japanese companies in the car department sometimes(although recently our cars are just about as good as anyone else's) but you gotta give us credit when it comes to our trucks. Ford, Chevy(GMC) and Dodge are all good trucks.
-
I'm not certain if they are any shorter or not- I don't think so, but if they are, it's not by much.
The Blazers and other GM trucks are indeed reliable, but don't think that means never fixing it. You'll replace ball joints about every other year at least, and probably have to replace the brakes every year, but then that's usual truck stuff.
When it comes to modding, the sky is the limit on Blazers. Do a search for "Blazer mods" or "custom Blazers" or get more specific and search for "light kit chevy blazer" and you'll see that they are ripe for upgrades and modifications. Also, pick up a few issues of "Mini Truckin'" Magazine to see even more cool custom stuff like these:





Good luck! :D
Def
-
The 4.3L wasn't a replacement for the 2.8L model- it was the next step up. It was the big six, while the 2.8 and 3.2 were small sixes.
I can't find any information on the 3.2L. I've never heard of it in a Blazer. Here's the available engines I found for it for 1st generation models(1983-1994) as copied from Wikipedia. I wonder if maybe Canada had models and/or options that weren't available in the US. That would not surprise me at all. Even the state of California sometimes gets automakers to make specially tuned engines just for them.
First generation engines
* 1983-1984 - 2.0 L OHV I4, 2-barrel carbureted, 83 hp (62 kW)/108 ft·lbf (146 N·m) * 1983-1985 - 1.9 L Isuzu I4, 2-barrel carbureted, 84 hp (63 kW)/101 ft·lbf (137 N·m) (California) * 1983-1985 - 2.2 L diesel I4, 58 hp (43 kW)/93 ft·lbf (126 N·m) * 1983-1985 - 2.8 L LR2 V6, 2-barrel carbureted, 110 hp (82 kW)/148 ft·lbf (201 N·m) (VIN B) * 1985-1989 - 2.5 L Tech IV I4, TBI, 92 hp (69 kW)/132 ft·lbf (179 N·m) (VIN E) * 1986-1993 - 2.8 L LL1 V6, TBI, 125 hp (93 kW)/150 ft·lbf (203 N·m) (VIN R) * 1988 - 4.3 L Vortec 4300 V6, TBI, 150 hp (112 kW)/230 ft·lbf (312 N·m) (VIN Z) * 1989-1992 - 4.3 L Vortec 4300 V6, TBI, 160 hp (119 kW)/230 ft·lbf (312 N·m) (VIN Z) * 1990-1993 - 2.5 L Tech IV I4, TBI, 105 hp (78 kW)/135 ft·lbf (183 N·m) (VIN A) * 1992-1993 - 4.3 L Vortec 4300 V6, CPFI, 195 hp (145 kW)/260 ft·lbf (353 N·m) (VIN W/Z) * 1994 - 2.2 L L43 I4, MPFI, 118 hp (88 kW)/130 ft·lbf (176 N·m) (VIN 4) * 1994 - 4.3 L Vortec 4300 V6, CMFI, 195 hp (145 kW)/260 ft·lbf (353 N·m) (VIN W/Z)http://en.wikipedia.org/wiki/Chevrolet_S-10_Blazer#Second_generation
-
Either that or the 3.2L was just used in the Firebird/Camaro and other cars?
It might not have been put into the Blazer- I was just guessing since the 3.2 replaced the 2.8 in cars.
Def
-
Don't ask me. I've confused myself beyond all usefulness.
-
Nice pics Def! I'd be afraid to even drive those for fear of driving by a guy blowing sand out into the street or parking it under a tree full of birds :D
My "mods" would be utilitarian for the most part. I might even get a high end CB radio for it and ditch my Radio Shack one 8)
-
Dem Google guys gots lotsa purdy pitchers...


:D
Def
-
Another question; is the 4WD something you can *choose * to use when you need it, or is it 4WD all the time?
-
My 93 had an electric switch on the dash. Could run in 2wd, 4wd, or 4wd low
-
@Corrugated said:
Another question; is the 4WD something you can *choose * to use when you need it, or is it 4WD all the time?The older model Blazers (believe that's what you're considering) will offer 2WH, 4WH, and 4WL ranges. Those ranges are activated using a separate shift lever from the regular gear shift.
So you can choose 2WH for everday operation. Change to 4WH for slick conditions. Change to 4WL for really hard going.
However, there is a complication due to lockout hubs.
If your Blazer has lockout hubs (which are desirable for better gas milage and reduced wear on the front drive train) you'll have to get out and manually lock in the front wheels before you can use the 4WH or 4WL ranges.
.
-
it's narrowing down now...early 90's S10 4 door...automatic
Those won't have lockout hubs. They have a vacuum-operated front axle disconnect actuator.
-
The electric switch saves a lot of space over the actual transfer case lever but I prefer having the lever as you always know when you are in 4WD or not. I don't trust electrical switches... In this pic of a Jeep interior, the smaller, second shifter to the left of the transmission shifter is for the transfer case:

Try to find something with a lever with the markings "2WD, N, 4WD, 4LO" marked on it if you can.
Otherwise, you'll get a series of buttons on the dash like this:

There's nothing wrong with them, but like I said, I don't trust them myself. There's something to be said for pulling on a lever and feeling the gears mesh underneath you.
Def
-
@Defender said:
There's nothing wrong with them, but like I said, I don't trust them myself. There's something to be said for pulling on a lever and feeling the gears mesh underneath you.Def
Same here. Manual linkages for me. I trust cables and shifters long before and electric or vacuum motor. If you're not going to be spending much time offroad, don't worry about it.
-
Yeah, Terry is right- if you don't plan to get dirty, it's even less important.
However, when the snow flies, and the roads ice over, you may want that extra bit of confidence in knowing that it's on and working too. Terry doesn't know what Atlantic winters are like, so we'll forgive him for that! :P
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



