firearms
-
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.
One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
I had heard some stuff about Colt...very sad. Mine are Early 80's-90's and the bulk of mine in the past were Series 70's guns. Out of 20+ Colt 1911s (Govts, Commanders and Gold Cups), never a bad one...never.
I strayed and bought a different 1911 brand only once....the old timers will probably remember MS Safari Arms. Shot three rounds out of it....on the 3rd shot, the front red insert flew out and the hammer fell to half cock. It went back the next day and I had my traded in stock Government Model back in my hands.
Now, that ain't to say I didn't mix in some Browing HPs, Smiths, Colts and Rugers occasionally! :D
:)I've had a Colt Combat Commander and Government Model both 70 series from the late seventies. Both of those were modified By James Hoag. No longer have either of those now. My present 1911 is a stock Springfield Loaded of wich I've put an extractor and firing pin stop from Wilson Combat in it. The main problem with the 1911 is its popularity. To many manufactures, gunsmiths and after market accessories that are designed to sell but dont work well have tarnished its reputation. Given a good 1911 and a good gunsmith who knows what they are doing to maintane it. It is my choice in an semi-auto pistol. Why a good gunsmith? If you shoot a lot you will need maintance work on it to keep it running good just like your car. I'm not against other semi-autos there are some good guns out there. Dont tell any one but I do like some of the combat tupperware out there. It just took me 20+ years to get there. :D :D
-
You could just get a Glock or CZ and skip the whole hassle.
-
@HarleyXJGuy said:
You could just get a Glock or CZ and skip the whole hassle.A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
-
You could just get a Glock or CZ and skip the whole hassle.
A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
Well as you know the CZ is your cup of tea then.
Seeing how you are not shooting much maybe we should work out a sale?
-
You could just get a Glock or CZ and skip the whole hassle.
A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
Well as you know the CZ is your cup of tea then.
Seeing how you are not shooting much maybe we should work out a sale?
You looking to sell your CZ? :D
-
First day over for the IPSC black badge course. It was a blast. I was feeling a bit bad about myself seeing how most of the other guys were shooting (I had to re-do a few of the exercises throughout the day due to misses), that was until I talked to a few of them, and found out they had been shooting for years. There were 3 or 4 newbies, and I think I was the most junior in experience to all of them. I got most of the forms and ideas real quick, but my accuracy wasn't where I would like it to be (my fifth time out with the M&P), especially at the farthest distances. I also tend to shoot low (my nemesis to-date), but with that said, I am sure it will come with practice.
They want us back tomorrow at 9 am sharp to start. I am thinking of going earlier to get some practice in.

-
Congrats on completing your first day.
-
Thanks.

-
@Chako said:
First day over for the IPSC black badge course. It was a blast. I was feeling a bit bad about myself seeing how most of the other guys were shooting (I had to re-do a few of the exercises throughout the day due to misses), that was until I talked to a few of them, and found out they had been shooting for years. There were 3 or 4 newbies, and I think I was the most junior in experience to all of them. I got most of the forms and ideas real quick, but my accuracy wasn't where I would like it to be (my fifth time out with the M&P), especially at the farthest distances. I also tend to shoot low (my nemesis to-date), but with that said, I am sure it will come with practice.They want us back tomorrow at 9 am sharp to start. I am thinking of going earlier to get some practice in.

Excellent!
Tonite is where you can make some progress doing dry fire while the shooting you did today is still a fresh memory.
-
I got at the range an hour early to get some much needed practice time. I couldn't figure out what I was doing wrong yesterday, as I was shooting a lot better when I go alone. I then looked back at what I changed and figured out that I was wearing a cheap pair of plastic safety glasses...the type that are designed to fit over prescription glassware. These caused me nothing but problems with distortions, glares, and haze.
Well I took them off and I was shooting a lot better. So well that I wasn't asked to re-do any stages today. I passed the course. Now I have to shoot a sanctioned match, send in my info card, and I will be sent a black badge.

Hmmm...I have had 8 soft strikes on 8 separate 9 mm rounds. I was shooting Barnaul, which is made in Russia. Not sure if the ammo is the issue, or my M&P. Going to try something different and see if it still persist. If not, then it is the ammunition. I think I will be staying away from this stuff anyways as I found out recently you can't re-use the casings...and it is only 2 dollars cheaper than the Remington's that use brass casings.
-
Sounds like your making good progress Dan!
-
@Chako said:
I got at the range an hour early to get some much needed practice time. I couldn't figure out what I was doing wrong yesterday, as I was shooting a lot better when I go alone. I then looked back at what I changed and figured out that I was wearing a cheap pair of plastic safety glasses...the type that are designed to fit over prescription glassware. These caused me nothing but problems with distortions, glares, and haze.Well I took them off and I was shooting a lot better. So well that I wasn't asked to re-do any stages today. I passed the course. Now I have to shoot a sanctioned match, send in my info card, and I will be sent a black badge.

**Hmmm...I have had 8 soft strikes on 8 separate 9 mm rounds. I was shooting Barnaul, which is made in Russia. Not sure if the ammo is the issue, or my M&P. **Going to try something different and see if it still persist. If not, then it is the ammunition. I think I will be staying away from this stuff anyways as I found out recently you can't re-use the casings...and it is only 2 dollars cheaper than the Remington's that use brass casings.
Google soft primer strikes with Smith and Wesson M&P and a lot of hits come back...probably worth a read.
-
Doing that right now.

-
Just finished cleaning the handgun...this time taking apart the firing pin assembly. As read from a few online forums, there were some metal fragments in the firing pin channel. I gave it a good cleaning. I hope this will fix the issue I had this weekend.
-
Hope that helped! 
-
@Chako said:
I got at the range an hour early to get some much needed practice time. I couldn't figure out what I was doing wrong yesterday, as I was shooting a lot better when I go alone. I then looked back at what I changed and figured out that I was wearing a cheap pair of plastic safety glasses...the type that are designed to fit over prescription glassware. These caused me nothing but problems with distortions, glares, and haze.Well I took them off and I was shooting a lot better. So well that I wasn't asked to re-do any stages today. I passed the course. Now I have to shoot a sanctioned match, send in my info card, and I will be sent a black badge.

Hmmm...I have had 8 soft strikes on 8 separate 9 mm rounds. I was shooting Barnaul, which is made in Russia. Not sure if the ammo is the issue, or my M&P. Going to try something different and see if it still persist. If not, then it is the ammunition. I think I will be staying away from this stuff anyways as I found out recently you can't re-use the casings...and it is only 2 dollars cheaper than the Remington's that use brass casings.
Seems like you figured it out already, but I would stay away from steel cased stuff as well as Russian ammunition. I normally only buy Federal (brass) ammunition. It has been the most consistent and normally cheaper than the more expensive Winchester and Remington ammunition. I tend to stay away from Remington ammunition all together after multiple occasions of questionable and obvious quality issues.
-
Wipe the breach face and the interiors of magazines dry, particularly if you are going to store them loaded. Penetrating fumes from solvents can ruin both primers and powder. On my ready-use pistol I like to load Winchester. They use a sealant on the primer.
On your reload cases make sure they're Boxer cases with a single centered flash hole; not Berdan cases with two off-center flash holes. Most American is Boxer primed; a lot of European in Berdan primed
-
I had problems with light primer strikes with a S&W 586 357 Magnum. I finally traded it for something else. I found out later that some S&W revolvers have problems with some primers, including CCI primers. I still use CCI primers and haven't had issues with other firearms so far.
-
Well this is what I was doing. At the local Canadian Tire, they stocked 2 types of 9 mm ammunition. Russian Barnaul, and Czech Sellier & Bellot. The Sellier ammo was a dollar more. I bought a few boxes of each every now and then. Then the Czech ammo disappeared and they only had the Russian stuff. Hence I bought a lot of the Russian stuff in fear that this supply of 9 mm ammo would dry up. They brought in a more expensive Remington 9 mm, and I started buying this instead. By this time, I had around 700 9 mm rounds of the Russian stuff.
So yes, I won't be buying anymore of the Barnaul ammo. I still have 500 rounds of this after the course.
-
We burned some powder last weekend. Here are some of the toys that showed up. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login