MT scissors comparison
-
NexTool Mini Flagship

Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 3
4 lb fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 2
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2
Zip tie - 3
Nylon rope - 2.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 3
Cutting out simple pattern on paper - 3
Ergonomics - 1.5Total - 68/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0In general, the NexTool Mini Flagship has good, almost great scissors, able to cut a variety of materials well.
Only the webbing and the braided fishing line gave it some trouble. However, it is lacking ergonomically. Though I could generate
plenty of power, the handles are very edgy, and the end of the handle that is used to deploy the scissors also dug into my palm.
Not to mention that the tip of the scissors cut my thumb one time while deploying them. Finally, more than once the keyring attached
to the tool got in the way of closing the handles while using the scissors.Note:
ReamerPunch owns a Mini Flagship, and the scissor spring after very little usage. That does not mean you would have the same (bad) luck,
but confidence in its durability should be somewhat diminished. -
More to come
-

Spoiler:
SURGE!!!
-
@Adam5 said:
NexTool Mini Flagship
Note:
ReamerPunch owns a Mini Flagship, and the scissor spring after very little usage. That does not mean you would have the same (bad) luck,
but confidence in its durability should be somewhat diminished.ReamerPunch is not alone, I had the same experience and I recently noticed that Nextool sells the scissor handle as a spare part. Whether this inspires confidence (because it can be fixed if it breaks) or distrust (because it implies that this failure is a common occurrence) is anyone's choice.
-
Thank you for this. Its always interesting to see such tests.
-
Here are some pictures of the materials being used in the test/comparison:

Thread, Mason Cord, Jute, 550 Paracord, 4lb monofilament fishing line, 0.065" trimmer string, 10lb braided fishing line
Denim, Cloth, Tissue, Felt, Plastic Bag, Padded Envelope, Cardboard
Webbing, Zip Tie, 18 awg Copper Wire, Stranded Copper Wire, Nylon Rope, Plastic Container, Rubber Ball, Leather Belt
Pattern -
Gerber Armbar Drive

Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 1.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 1.5
Cloth - 2
Tissue - 2
Felt - 2
Cardboard - 0
Plastic bag - 3
Padded envelope - 3
Webbing - 1.5
Zip tie - 2.5
Nylon rope - 1.5
Stranded copper wire - 2
18 awg copper wire - 3
Plastic container - 0
Rubber ball - 1.5
Leather belt - 0
Cutting out simple pattern on paper - 2
Ergonomics - 2.5Total - 49.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0
Disappointing performance. There is not enough leverage to cut tougher materials well. The bevel of the scissor edges seem to be a bit more obtuse than other scissors, which does not help. But the edges are not dull, as witnessed by its ability to cut the braided fishing line. Also, the construction of the scissors does not extend the thumb pad beyond or above the pivot. When pressing the thumb pad down fully to complete a cut, my thumb was obstructed a bit by the pivot. -
Craftsman 10 in 1

Thread - 2
Mason cord - 2
Jute - 2
550 Paracord - 2
4 lb monofilament fishing line - 2
0.065" trimmer string - 3
10 lb braided fishing line - 1.5
Denim - 2.5
Cloth - 2.5
Tissue - 2
Felt - 0
Cardboard - 3
Plastic bag - 2
Padded envelope - 2.5
Webbing - 2.5
Zip tie - 3
Nylon rope - 2.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 2.5
Cutting out simple pattern on paper - 3
Ergonomics - 3Total - 57.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0I had to cut near the tips for finer materials (last 1/4th of scissors). That is the only section where the edges meet. Otherwise, they perform well. Nice handles that, while maybe a bit bulky for keychain tool, felt good in my hand and allowed me to generate power.
-
Leatherman S4

Thread - 3
Mason cord - 3
Jute - 2.5
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 3
Zip tie - 3
Nylon rope - 2
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 2.5
Cutting out simple pattern on paper - 3
Ergonomics - 3Total - 69/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0Cuts better towards the tips than the pivot. It does cut very well if you stay in the sweet spot.
-
SOG Snippet

Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2.5
Zip tie - 3
Nylon rope - 2.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 3
Ergonomics - 1Total - 65/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0The Snippet does not have a spring for opening the scissors. Instead, it has a couple of outer handles that let the tool operate in the manner typical scissors do. Overall, the Snippet cuts well. But it is by far the least comfortable of all the scissors MTs that I have used.
-
Great thread Adam.

Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
-
@Gareth said:
Great thread Adam.
Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
Thanks Gareth :D
Well, the Micra is new and the S4 is like new, so the difference isn't due to age and wear.
Some of the difference can probably be attributed to variances in manufactoring. If several Micras were tested, some of them may perform better then the one I have.
-
Any chance of you (or anyone) graphing the results one day?
-

I was thinking of the individual scores too. But that would be a lot of work.
-
Well, the Micra is new and the S4 is like new, so the difference isn't due to age and wear.
Some of the difference can probably be attributed to variances in manufactoring. If several Micras were tested, some of them may perform better then the one I have.

Yeah, sample size of one should always be taken into consideration but the test is still valid.

-
This is awesome! Great work Adam. Thanks for doing this

I see the difference between my Micra and my Style CS too here.
However, the Micra was a bit loose at the pivot.
I peened it tighter and it's better since. -
@Gareth said:
Great thread Adam.
Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
My Micra matches the ratings here, and it's old but barely used. My Craftsman tool outperforms it handily. I have a SOG crosscut 2 and a Schrade tough chip, and the Craftsman has better scissors than either. Though the cross-cut has compound leverage which means those scissors will go through a lot thicker stuff a lot more easily. But for paracord and such the Craftsman tool I have is unbeatable.
Charles.
-
My Micra is pretty good, until I almost ruined it when I tried to mod it. Thankfully I was able to fix it with the loki wrenches. Thanks again, loki.

Nice work, Adam. I appreciate the shout-out and the fact that you used so many materials.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
