MT scissors comparison
-
Leatherman S4

Thread - 3
Mason cord - 3
Jute - 2.5
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 3
Zip tie - 3
Nylon rope - 2
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 2.5
Cutting out simple pattern on paper - 3
Ergonomics - 3Total - 69/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0Cuts better towards the tips than the pivot. It does cut very well if you stay in the sweet spot.
-
SOG Snippet

Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2.5
Zip tie - 3
Nylon rope - 2.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 3
Ergonomics - 1Total - 65/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0The Snippet does not have a spring for opening the scissors. Instead, it has a couple of outer handles that let the tool operate in the manner typical scissors do. Overall, the Snippet cuts well. But it is by far the least comfortable of all the scissors MTs that I have used.
-
Great thread Adam.

Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
-
@Gareth said:
Great thread Adam.
Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
Thanks Gareth :D
Well, the Micra is new and the S4 is like new, so the difference isn't due to age and wear.
Some of the difference can probably be attributed to variances in manufactoring. If several Micras were tested, some of them may perform better then the one I have.
-
Any chance of you (or anyone) graphing the results one day?
-

I was thinking of the individual scores too. But that would be a lot of work.
-
Well, the Micra is new and the S4 is like new, so the difference isn't due to age and wear.
Some of the difference can probably be attributed to variances in manufactoring. If several Micras were tested, some of them may perform better then the one I have.

Yeah, sample size of one should always be taken into consideration but the test is still valid.

-
This is awesome! Great work Adam. Thanks for doing this

I see the difference between my Micra and my Style CS too here.
However, the Micra was a bit loose at the pivot.
I peened it tighter and it's better since. -
@Gareth said:
Great thread Adam.
Surprised to see a notable difference between your Micra and Squirt. I know they're not actually the same scissor head but I didn't think there was a practical difference. Could age and wear be a factor?
My Micra matches the ratings here, and it's old but barely used. My Craftsman tool outperforms it handily. I have a SOG crosscut 2 and a Schrade tough chip, and the Craftsman has better scissors than either. Though the cross-cut has compound leverage which means those scissors will go through a lot thicker stuff a lot more easily. But for paracord and such the Craftsman tool I have is unbeatable.
Charles.
-
My Micra is pretty good, until I almost ruined it when I tried to mod it. Thankfully I was able to fix it with the loki wrenches. Thanks again, loki.

Nice work, Adam. I appreciate the shout-out and the fact that you used so many materials.

-
I'd be interested in the results of some full size MT's. Great work!
-
Great review of several different tools
I use scissors quite a and usually just rely on SAK scissors but I do have a few of these tools as well and keep a Micra close by at home and a Squirt S4 in my work backpack 
Glad to see so many material and the chart you made is also helpful when comparing all the data together

-
Thanks guys!
I will try to get some more reviews/results out soon. I do plan to include full size MTs also. I have a decent amount of them to try out as well as some more mini scissors based MTs and some mini MTs that include scissors. Hopefully the list will eventually include Surge and Wave scissors.
Also, I will try to relearn some things I use to know how to do with LibreOffice and make some better charts.
-
I might be dreaming here
, but is there a way of having an interactive chart where you pick one or two criteria and it graphs them? Kinda like the "Compare" function some manufacturer's websites have but with graded values rather than yes/no. 
-
I will look into it. It may prove to be beyond my abilities, but I can see the utility of such a function and so I will try to do it.
-
Leatherman Juice CS3

It is my hope that the scissors on the CS3 can be a stand-in for all Juice scissors. If this is thought to be a wrong assumption on my part, please let me know.
Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 2.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 2.5
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2.5
Zip tie - 2
Nylon rope - 1.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 2.5
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 2.5
Ergonomics - 2.5Total - 64/72
*Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0
*Good scissors. Had a tendency to open up too much, allowing material to get into the region between the pivot and the cutting edge, which leaves a bit of the material uncut. Had some trouble with the thicker, tougher materials.
-
Fantastic thread Adam

I reckon the LM CS3 makes a great compliment to MT's like the Rebar or Alox SAK's as a small, quick way of adding scissors & corkscrew
Nothing like as thorough as your comparison, but I did do a SAK scissors size comparison (as well as blades and saws) a while a back you might find interesting
/post/2197772

-
@Echotech said:
Fantastic thread Adam

I reckon the LM CS3 makes a great compliment to MT's like the Rebar or Alox SAK's as a small, quick way of adding scissors & corkscrew
Nothing like as thorough as your comparison, but I did do a SAK scissors size comparison (as well as blades and saws) a while a back you might find interesting
/post/2197772

Nice collection!
-
Thanks Adam

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
