Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunchR
    ReamerPunchR
    ReamerPunch
    Global Moderators
    wrote on last edited by
    #347

    New Topeak ratchet. 60NM, looks like the Prestacycle, with a different head. Knurled long bits. I can't see how many teeth though. And expensive.

    1 Reply Last reply
    0
    • G
      G
      gravelmonkey
      wrote on last edited by
      #348

      @ReamerPunch said:
      Rockbros new mini ratchet. 8 bits and case. :salute:

      Ordered one of these a few days ago and came here to see if you'd seen it, which you have! I like the idea of the enclosed tube-shaped case.

      Additionally, I've recently received the Geinxurn branded bit ratchet from AliExpress, the knurling on the handle is good. The T-handle is a slightly different design - somehow they've designed it such that every 1/12th (?) rotation is pass-through, rather than other brands which are only pass-through on the marked single position.

      1 Reply Last reply
      0
      • ReamerPunchR
        ReamerPunchR
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #349

        That RockBros looks great. I have one in a tube case, the CyclingDeal, but the tube has a bracket to attach to a bike frame, and nothing else. No clips, no holes for a lanyard. And it was expensive, and came with only 6 bits. This RockBros set is much better. Although I already have many Topeak-alike ratchets, so I am looking for different designs.

        That Geinxurn is interesting. When it first came out, it didn't even mention it was t-handle, no mention n the title, or the description, and no pics with it in t-handle configuration. It does look nice, and it is quite inexpensive. 72 teeth as well. PrestaCycle has 60. And, the Geinxurn has knurling! Finally, they're getting the hint. I loved the knurling on the Blackburn. Speaking of, the BlackBurn is $58 on amazon right now. :ahhh It had dropped to $28 recently. Too bad. It is a great little ratchet.

        1 Reply Last reply
        0
        • ReamerPunchR
          ReamerPunchR
          ReamerPunch
          Global Moderators
          wrote on last edited by
          #350

          Also, I am reluctant to order from Amazon US for now. My latest order was opened en route and the items were stolen and replaced with a bed sheet, so I do not want it to happen again. :rant:

          1 Reply Last reply
          0
          • G
            G
            gravelmonkey
            wrote on last edited by
            #351

            @ReamerPunch said:
            Well, here we are. LaBear has released their own set of mini ratchet and extension. Identical to the CROM set, plus 5 bits in a tiny bit holder, and it costs less. I do not think I will get it, so I cannot 100% say that the LaBear is the same high quality of the CROM set, but it would appear that LaBear is the key-chain t-handle ratchet to beat. :salute:

            Prices are USD

            I've recently ordered the Geixern version of this, comes as a stubby ratchet in a metal tin, similar to the 711L product, hopefully the quality is good, the price was very reasonable, I paid £6 delivered on AliExpress.

            The 711L mini ratchet on its own is £16 on Amazon and the Labear is £25.

            Oh and while I'm posting, I double checked, Geinxurn ratchet wrench is actually 60 tooth, not 72.

            1 Reply Last reply
            0
            • Sos24S
              Sos24S
              Sos24
              Global Moderators
              wrote on last edited by
              #352

              @ReamerPunch said:
              Also, I am reluctant to order from Amazon US for now. My latest order was opened en route and the items were stolen and replaced with a bed sheet, so I do not want it to happen again. :rant:

              So sorry to hear that happened.

              1 Reply Last reply
              0
              • ReamerPunchR
                ReamerPunchR
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #353

                The Ares ratchet is getting recognised! 😄

                https://www.youtube.com/watch?v=9GzopyHB06E

                1 Reply Last reply
                0
                • ReamerPunchR
                  ReamerPunchR
                  ReamerPunch
                  Global Moderators
                  wrote on last edited by ReamerPunch
                  #354

                  Vessel MR36 4mm bit ratchet set

                  (Ratchet can also be found branded by 711L)

                  Weight: 18g
                  Set weight: 214g
                  Length: 53mm
                  Head width: 14mm
                  Head clearance with standard 4mm bit: 29mm (adds 1mm)
                  Teeth count: 52
                  Minimum swing arc: 7°
                  Bit retention: spring detent
                  Extension retention: magnet
                  In-line driver retention: magnet
                  Bit material: S2 steel
                  Handle material: Chrome Vanadium steel
                  Price: $30 with 36 4mm bits, extension, case
                  Bits:
                  Phillips 000, 00, 00, 0, 0, 1, 2
                  Allen 0.89, 1.5, 2
                  Torx 2, 3, 4
                  TamperProof Torx 5, 6, 7, 8, 9, 10, 15
                  Slotted 1.5, 1.5, 2, 3, 4
                  Y 0.6, 1, 2, 2.5
                  Triangle 2, 2.3
                  U 2, 2.6
                  Pentalobe 1, 4
                  SIM ejector bit

                  Accessories
                  The Vessel MR36 ratchet set consists of the ratchet, 36 4mm bits, an extension, a case, and two small foam pieces.
                  The bits are standard 4mm bits, and the selection is extensive. Along with Tamperproof Torx, Phillips, Allen, etc, we also have Y, U, Triangle, Pentalobe, even a SIM ejector bit. Bit material is S2 steel.
                  The extension is a welcome addition, and quite a rare sight, as it is of course for 4mm bits.
                  The case is slim. The lid is spring-loaded and releases with a slider. There is indexing so the lid will stay open at the angle it is left at. It also pivots to 270 degrees, so the case can stand with the bits upright at full display. The bits are held in by friction. There are no identifiers as to the bit designations on the case, so users will have to check the actual bits for their sizes. The ratchet and extension are stored connected. They are held in place by two yokes. This is not perfect, and the ratchet and extension can move left and right, which is why the two foam pieces are included. This case was made for the Vessel 9836 Precision Screwdriver Set, which has a 4mm driver handle instead of the ratchet and extension, and is used for this set to cut costs. With the foam pieces, the ratchet and extension seem fine when the case is closed, but these should have probably been glued in the case to keep them in place when the ratchet and extension are removed.

                  Dimensions
                  At 53mm, this is tiny, and it has an incredibly narrow head, at only 14mm wide. As the inline driver is for 4mm bits, it is of course much slimmer than other ratchets of similar length, that take 1/4" bits. This is also the lightest ratchet so far, at only 18 grams, ahead of the 711L ratchet at 19 grams and the CROM at 20 grams.


                  Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

                  Teeth Count
                  The Vessel ratchet has 52 teeth, which provide a 7 degree return angle. This is excellent, and currently it is the only option for 4mm bit ratchets, as the 711L 4mm ratchet is identical to this other than branding.

                  Bit Retention
                  Bits are held in the ratchet with a spring. Retention is excellent and removing bits is extremely easy since 4mm bits are 28mm long.
                  In the inline driver and the extension, bits are held in with magnets. Retention is excellent.

                  Bit compatibility
                  The ratchet driver has a hole in the backplate, so it can drive double-ended bits.
                  Sadly, the inline driver and extension are not deep enough for double-ended bits.
                  Regular 4mm bits are of course perfect, as the ratchet and extension were made to be used with those.

                  Switch action
                  The switch is tiny, tucked behind the head. No chance of triggering it accidentally.

                  Ease of use
                  The Vessel mini ratchet has a knurled finger wheel, which is always nice to have. It has a hole in the head so it can drive double-ended bits if needed.
                  The extension is excellent for increasing reach for the bit, as well as extending the handle length, for more comfort. It is also ribbed to provide some more grip.
                  52 teeth provide a return angle of 7 degrees. The extension connected to the ratchet stands in for a bit driver handle.
                  The case stands upright making it easier to remove bits.

                  The case does not have bit designations on it, so users will either have to eyeball the bit they need, or check the bits themselves for the one that is needed.
                  The foam pieces that act as spacers should be glued in the case, to keep them in place when using the ratchet.

                  Note that the case has a warning against using the ratchet end with the extension connected to the inline driver. If you require more torque than this microscopic 4mm bit ratchet can provide, you need to get a larger ratchet. This is a precision set, not a persuasion set.

                  Construction Quality
                  The entire set is of high quality. The bits, extension, and ratchet are flawless. Everything looks crisp, properly finished, and everything works properly. The case is just plastic, nothing really spectacular, but it closes properly, and has proper hinges with steel pins. The indexing lid works for what it was designed for as well.

                  Portability
                  The ratchet is the most compact so far in this thread, and it seems hard to top, as it holds first place in quite a few lists: the narrowest head, at 14mm; the lightest, at 18 grams; among the shortest, at 53mm long; the narrowest inline driver, as it is for 4mm bits. This will disappear in any pocket or pouch, and for once, it is too small to go in a pen sleeve or multi-tool sheath side-sleeve. The head does have a hole, so it can be clipped on your keys, although it will require a very slim clip, and the bits will have to go in a pouch or something.

                  The case is slim but quite wide. It will fit comfortably in a bag or pouch, but if you are thinking or carrying this for edc, maybe carry the ratchet and extension from this kit, and have bits in a secondary container, like a pen screwdriver, chap-stick tube, mini Tic-Tac box, etc.

                  Value
                  The Vessel MR36 offers excellent value for money. It is a comprehensive precision bit set, with 36 bits that include TamperProof Torx, U, Y, Triangle, etc. It also has a very handy extension that increases reach and comfort. And the star of the show, a tiny ratchet for 4mm bits. Despite its modest size, it is a proper, real ratchet; switch, inline driver, 52 teeth and all.

                  It is even better when you consider that the identical ratchet can be found branded by 711L, and it is about the same price, but comes with only two 4mm bits and a small tin. Compared to that, the Vessel MR36 is a real 4mm bit toolbox.


                  Left to right: LaBear folding, Vessel, 711L, CROM, Jackly

                  Conclusion
                  This is the first 4mm bit ratchet so far in this thread, and what an excellent one at that. The ratchet is wonderful, it works perfectly, it is as small as it gets, and the extension is also an excellent addition that elevates the kit in every way. There are also 36 bits, which cover a wide variety of fasteners. The price is truly amazing for what it offers.

                  The case may be a little too wide for edc, and 4mm bits naturally are not as resilient as 1/4" bits. Plus, the specialty bits are arguably overkill for edc. It would have helped if the bits were double-ended. Then we would have had half as many bits, the case would have been smaller, and the weight would have been reduced.

                  Still, for people who are looking for a 4mm bit ratchet to round out their edc, this is an excellent choice. Even for people looking for just the ratchet, this is still the one to get, since it comes with a great little extension, and is better value than the 711L one. The two ratchets are identical, cost about the same, but the 711L comes with two 4mm bits, whereas the Vessel is an entire kit.

                  Pros
                  -Excellent value for money.
                  -Comprehensive 4mm bit selection.
                  -Included extension improves comfort and reach.

                  Cons
                  -Ratchet inline driver and extension cannot drive double-ended bits.
                  -Foam pieces should be glued.

                  If you liked this ratchet, also check out:

                  1 Reply Last reply
                  0
                  • ReamerPunchR
                    ReamerPunchR
                    ReamerPunch
                    Global Moderators
                    wrote on last edited by ReamerPunch
                    #355

                    New Geinxurn mini ratchet. 2.5 inches in length, 72 teeth. The CROM and LaBear t-handle ratchets are 60 teeth. Standard 711L is 52 teeth. These are two inches long. Interesting. :think:
                    Oh, boy. ::)

                    1 Reply Last reply
                    0
                    • Old BoyO
                      Old BoyO
                      Old Boy
                      wrote on last edited by
                      #356

                      Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.

                      I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?

                      1 Reply Last reply
                      0
                      • ReamerPunchR
                        ReamerPunchR
                        ReamerPunch
                        Global Moderators
                        wrote on last edited by
                        #357

                        @Old Boy said:
                        Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.

                        I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?

                        :cheers:

                        The 4mm bit ratchet is largely a luxury, a novelty. Like you say, you do not need a ratchet for tiny screws. 711L was the first to offer the 2" ratchet for regular bits, to appeal to the edc community. Short ratchet, ratchets that fit in the Leatherman bit driver, short t-handle ratchets, short folding ratchets, the designs kept coming. So 711L probably thought, "What else can we sell?", they saw the gap, and released the 4mm bit ratchet. It is functional, do not get me wrong, but it is mostly a novelty item, kinda like the ratcheting bit adapter.

                        This is the only other 4mm bit ratchet I have seen:

                        1 Reply Last reply
                        0
                        • Old BoyO
                          Old BoyO
                          Old Boy
                          wrote on last edited by
                          #358

                          Thanks ReamerP for saving my money.

                          1 Reply Last reply
                          0
                          • m47mu74ntM
                            m47mu74ntM
                            m47mu74nt
                            wrote on last edited by
                            #359

                            Quick 'n dirty review of the Real Avid X3 driver gunsmithing set :
                            [attach id=0 msg=2575890]

                            Stored in a fragile plastic case, it is quite compact, until the latch breaks (ask me how I know)
                            [attach id=1 msg=2575890]
                            [attach id=2 msg=2575890]
                            [attach id=3 msg=2575890]

                            Marketed by Real Avid as a gunsmithing set, it features a 1/4" ratchet and extension, and 13 bits oriented towards AR-15 and similar rifle maintenance:

                            HEX: 5/64", 3/32", 5/32", 3/16", 3.0MM, 4.0MM, 5.0MM
                            TORX®: T10, T15, T20, T25
                            PHILLIPS®: #1
                            FLAT: 5MM

                            real_avid_0.jpg

                            real_avid_1.jpg

                            real_avid_2.jpg

                            real_avid_3.jpg

                            1 Reply Last reply
                            0
                            • m47mu74ntM
                              m47mu74ntM
                              m47mu74nt
                              wrote on last edited by
                              #360

                              [attach id=0 msg=2575891]
                              [attach id=1 msg=2575891]

                              72 teeths Ratchet with 2 additional 1/4" holes, can be used alone or with the extension that can be either put in the ratchet head or in any of the two additional holes to make a "long screw driver" or a T-handle screw driver

                              [attach id=2 msg=2575891]
                              [attach id=3 msg=2575891]

                              As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.

                              • Tolerances are loose, the extension wobbles when plugged into the ratchet
                              • Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
                              • Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.

                              real_avid_4.jpg

                              real_avid_5.jpg

                              real_avid_6.jpg

                              real_avid_7.jpg

                              1 Reply Last reply
                              0
                              • m47mu74ntM
                                m47mu74ntM
                                m47mu74nt
                                wrote on last edited by
                                #361

                                If I wasn't clear enough above : I do not recommend getting that set :oops:

                                T-handle position compared to Facom T-handle position of the R.180
                                [attach id=0 msg=2575894]

                                real_avid_8.jpg

                                1 Reply Last reply
                                0
                                • ReamerPunchR
                                  ReamerPunchR
                                  ReamerPunch
                                  Global Moderators
                                  wrote on last edited by ReamerPunch
                                  #362

                                  Ratchets reviewed so far

                                  1 Reply Last reply
                                  0
                                  • ReamerPunchR
                                    ReamerPunchR
                                    ReamerPunch
                                    Global Moderators
                                    wrote on last edited by
                                    #363

                                    @m47mu74nt said:
                                    As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.

                                    • Tolerances are loose, the extension wobbles when plugged into the ratchet
                                    • Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
                                    • Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.

                                    That is so unfortunate. It really does look like a premium set. I guess I'll drop it from my "to buy" list. Thanks. :salute:

                                    1 Reply Last reply
                                    0
                                    • m47mu74ntM
                                      m47mu74ntM
                                      m47mu74nt
                                      wrote on last edited by
                                      #364

                                      It is really unfortunate!
                                      I was looking for some of their nicer/premium toolkits (like the torque limited bit set) but like wine, if the producer can't get to make a good entry level product, it is not advisable to even get their "top tier" product.

                                      I used the kit again today, and I may have been a bit harsh on the ratchet/extension as it does it's job correctly, but that plastic case really takes everything down.

                                      1 Reply Last reply
                                      0
                                      • ReamerPunchR
                                        ReamerPunchR
                                        ReamerPunch
                                        Global Moderators
                                        wrote on last edited by ReamerPunch
                                        #365

                                        WorkPro W002147A Mini Bit Ratchet

                                        Weight: 54g
                                        Bit set: 116g
                                        Length: 105mm
                                        Head width: 18mm
                                        Head clearance with standard bit: 27mm (adds 2mm)
                                        Teeth count: 72
                                        Minimum swing arc: 5°
                                        Bit retention: spring detent
                                        In-line driver: no
                                        Bit material: S2 steel
                                        Handle material: Chromium-Vanadium steel
                                        Price: $10 with 20 bits and two bit holders
                                        8mm box wrench
                                        Bits:
                                        Phillips 0, 1, 2, 3
                                        Allen 3, 4, 5, 6
                                        Pozi 1, 2, 3
                                        TamperProof Torx 10, 15, 20, 25, 30
                                        Slotted 4, 5, 6
                                        Square socket adapter

                                        Accessories
                                        The WorkPro mini ratchet comes with twenty bits and two rubber bit holders. The bits are made of S2 steel, which is nice to see in such an inexpensive set. They are well-made and fit their respective screws perfectly. The bit selection is great, with Allen, Pozi, even Tamperproof Torx and a square socket adapter, and no repeats. The ratchet is also available with an Imperial bit set.
                                        The bit holders are the common rubber variety, but since this set does not come with a case, the holders are much appreciated.

                                        Dimensions
                                        At 54 grams, this is kind of chunky, but understandable considering the length. At 105mm long, this is definitely on the longer side of edc ratchets. The head is only 18 mm wide, which is great considering the teeth count.


                                        Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

                                        Teeth Count
                                        This has 72 teeth, which is on the higher end of the spectrum. It has a 5 degree return angle, so it will be able to work even in very confined spaces.

                                        Bit Retention
                                        Bits are held in with a spring. This looks like the common spring of high end edc ratchets, like PrestaCycle, Topeak, etc, but it is not. The spring on the WorkPro is a little longer than it needs to be, so it can slide along the bit socket about 2 mm back and forth. It is also noticeably weaker. Bits are still held in firmly, and stubby bits are easy to remove.

                                        Bit compatibility
                                        Thanks to the hole in the head, the ratchet can be used with double-ended bits.
                                        Stubby bits are easy to remove. Leatherman bits work perfectly as well.

                                        Switch action
                                        The switch is small, and tucked behind the knurled wheel. It does seem improbable that it would be bumped accidentally, but it feels a little loose.

                                        Ease of use
                                        The WorkPro ratchet has a comfortable four-finger grip, thanks to its length and flat body. With 72 teeth, it can turn fasteners in quite tight spaces.
                                        The knurled thumb wheel makes quick work of somewhat loose fasteners. Although it is not as tight as on other ratchets, the knurled wheel cannot be operated with only a thumb or index finger. Because of the looseness of the ratcheting socket in the frame, it takes pinching it to make it turn, otherwise it is just pushed against one side of the frame and does not move.
                                        The 8mm box wrench is useful for both Metric and Imperial fasteners, and can be used as a loop for attaching a cord to prevent loss.
                                        The hole in the head allows for double-ended bits. It only adds a couple of mm to a bit's clearance.

                                        Construction Quality
                                        This may seem like another version of the high quality ratchets we have seen so far, like the PrestaCycle, BluckBurn, Topeak, etc. It is not. The switch has a lower detent, and the bit retention spring is weaker and a little ill-fitting on the bit socket. The ratchet mechanism has some play in the frame. This is a first so far. Many ratchets exhibit some wobble of the ratchet mechanism in the frame, but this feels a little loose. It still works properly and has not failed in the slightest, but the wobble does not inspire confidence, especially considering that it is absent in similar ratchets, and is much worse than even the most inexpensive ratchets reviewed so far.

                                        The finish is consistent and crisp, and the bits are flawless.

                                        Portability
                                        Thanks to the 8mm box wrench end, the ratchet can be attached to other gear with large carabiners or cord. It will not fit in an Altoids tin but it will in edc pouches, or multi-tool sheath side-sleeves.

                                        Value
                                        Seeing how it only costs $10, it does seem like a good deal. It comes with 20 bits, two bit holders, and has some nice features.

                                        Conclusion
                                        On paper, the WorkPro mini ratchet seemed too good to be true and well, it is. The price is quite low, among the lowest so far. The features are there: 72 teeth, knurled thumb wheel, hole in the head, 8 mm box wrench, good ergonomics. It also comes with two bit holders and twenty flawless S2 bits, with a good bit selection and no bit repeats.
                                        However, the quality feels a little lacking. The ratcheting socket, the bit retention spring, and the switch are all a little loose in the frame. Had corners been cut elsewhere, like bit amount, bit material, teeth count, this would have been an excellent choice for an inexpensive bit ratchet. Again, it has not failed in any way so far, and it may continue working perfectly and even outlast many ratchets of this thread. Let's just say that if it does fail in the near future, it will not be surprising. Is it recommended? Tough to say. It is very inexpensive, and for $10, it would be worth it just for the bits and bit holders.

                                        Pros
                                        -Very inexpensive.
                                        -72 teeth, knurled wheel, hole in the head, 8mm box wrench.
                                        -Excellent bit selection, with Allen, Tamperproof Torx, etc, and no repeats.
                                        -Set comes in both Metric and Imperial.
                                        -Good ergonomics.

                                        Cons
                                        -Lower quality compared to similar ratchets.

                                        If you liked this ratchet, also check out:

                                        1 Reply Last reply
                                        0
                                        • Farmer XF
                                          Farmer XF
                                          Farmer X
                                          wrote on last edited by
                                          #366

                                          Bit ratchets could prove very useful for the business I plan on starting, so I'll have to review this thread as time permits. Thank you for keeping it going! :cheers:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World