Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  1. Home
  2. Tool Talk
  3. Reviews
  4. EDC Bit Ratchets
EDC Bit Ratchets
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunch Offline
    ReamerPunch
    Global Moderators
    Posts: 12,187
    ReamerPunch Offline
    ReamerPunch
    Global Moderators
    wrote on last edited by ReamerPunch
    #353 Quote Reply

      Vessel MR36 4mm bit ratchet set

      (Ratchet can also be found branded by 711L)

      Weight: 18g
      Set weight: 214g
      Length: 53mm
      Head width: 14mm
      Head clearance with standard 4mm bit: 29mm (adds 1mm)
      Teeth count: 52
      Minimum swing arc: 7°
      Bit retention: spring detent
      Extension retention: magnet
      In-line driver retention: magnet
      Bit material: S2 steel
      Handle material: Chrome Vanadium steel
      Price: $30 with 36 4mm bits, extension, case
      Bits:
      Phillips 000, 00, 00, 0, 0, 1, 2
      Allen 0.89, 1.5, 2
      Torx 2, 3, 4
      TamperProof Torx 5, 6, 7, 8, 9, 10, 15
      Slotted 1.5, 1.5, 2, 3, 4
      Y 0.6, 1, 2, 2.5
      Triangle 2, 2.3
      U 2, 2.6
      Pentalobe 1, 4
      SIM ejector bit

      Accessories
      The Vessel MR36 ratchet set consists of the ratchet, 36 4mm bits, an extension, a case, and two small foam pieces.
      The bits are standard 4mm bits, and the selection is extensive. Along with Tamperproof Torx, Phillips, Allen, etc, we also have Y, U, Triangle, Pentalobe, even a SIM ejector bit. Bit material is S2 steel.
      The extension is a welcome addition, and quite a rare sight, as it is of course for 4mm bits.
      The case is slim. The lid is spring-loaded and releases with a slider. There is indexing so the lid will stay open at the angle it is left at. It also pivots to 270 degrees, so the case can stand with the bits upright at full display. The bits are held in by friction. There are no identifiers as to the bit designations on the case, so users will have to check the actual bits for their sizes. The ratchet and extension are stored connected. They are held in place by two yokes. This is not perfect, and the ratchet and extension can move left and right, which is why the two foam pieces are included. This case was made for the Vessel 9836 Precision Screwdriver Set, which has a 4mm driver handle instead of the ratchet and extension, and is used for this set to cut costs. With the foam pieces, the ratchet and extension seem fine when the case is closed, but these should have probably been glued in the case to keep them in place when the ratchet and extension are removed.

      Dimensions
      At 53mm, this is tiny, and it has an incredibly narrow head, at only 14mm wide. As the inline driver is for 4mm bits, it is of course much slimmer than other ratchets of similar length, that take 1/4" bits. This is also the lightest ratchet so far, at only 18 grams, ahead of the 711L ratchet at 19 grams and the CROM at 20 grams.


      Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

      Teeth Count
      The Vessel ratchet has 52 teeth, which provide a 7 degree return angle. This is excellent, and currently it is the only option for 4mm bit ratchets, as the 711L 4mm ratchet is identical to this other than branding.

      Bit Retention
      Bits are held in the ratchet with a spring. Retention is excellent and removing bits is extremely easy since 4mm bits are 28mm long.
      In the inline driver and the extension, bits are held in with magnets. Retention is excellent.

      Bit compatibility
      The ratchet driver has a hole in the backplate, so it can drive double-ended bits.
      Sadly, the inline driver and extension are not deep enough for double-ended bits.
      Regular 4mm bits are of course perfect, as the ratchet and extension were made to be used with those.

      Switch action
      The switch is tiny, tucked behind the head. No chance of triggering it accidentally.

      Ease of use
      The Vessel mini ratchet has a knurled finger wheel, which is always nice to have. It has a hole in the head so it can drive double-ended bits if needed.
      The extension is excellent for increasing reach for the bit, as well as extending the handle length, for more comfort. It is also ribbed to provide some more grip.
      52 teeth provide a return angle of 7 degrees. The extension connected to the ratchet stands in for a bit driver handle.
      The case stands upright making it easier to remove bits.

      The case does not have bit designations on it, so users will either have to eyeball the bit they need, or check the bits themselves for the one that is needed.
      The foam pieces that act as spacers should be glued in the case, to keep them in place when using the ratchet.

      Note that the case has a warning against using the ratchet end with the extension connected to the inline driver. If you require more torque than this microscopic 4mm bit ratchet can provide, you need to get a larger ratchet. This is a precision set, not a persuasion set.

      Construction Quality
      The entire set is of high quality. The bits, extension, and ratchet are flawless. Everything looks crisp, properly finished, and everything works properly. The case is just plastic, nothing really spectacular, but it closes properly, and has proper hinges with steel pins. The indexing lid works for what it was designed for as well.

      Portability
      The ratchet is the most compact so far in this thread, and it seems hard to top, as it holds first place in quite a few lists: the narrowest head, at 14mm; the lightest, at 18 grams; among the shortest, at 53mm long; the narrowest inline driver, as it is for 4mm bits. This will disappear in any pocket or pouch, and for once, it is too small to go in a pen sleeve or multi-tool sheath side-sleeve. The head does have a hole, so it can be clipped on your keys, although it will require a very slim clip, and the bits will have to go in a pouch or something.

      The case is slim but quite wide. It will fit comfortably in a bag or pouch, but if you are thinking or carrying this for edc, maybe carry the ratchet and extension from this kit, and have bits in a secondary container, like a pen screwdriver, chap-stick tube, mini Tic-Tac box, etc.

      Value
      The Vessel MR36 offers excellent value for money. It is a comprehensive precision bit set, with 36 bits that include TamperProof Torx, U, Y, Triangle, etc. It also has a very handy extension that increases reach and comfort. And the star of the show, a tiny ratchet for 4mm bits. Despite its modest size, it is a proper, real ratchet; switch, inline driver, 52 teeth and all.

      It is even better when you consider that the identical ratchet can be found branded by 711L, and it is about the same price, but comes with only two 4mm bits and a small tin. Compared to that, the Vessel MR36 is a real 4mm bit toolbox.


      Left to right: LaBear folding, Vessel, 711L, CROM, Jackly

      Conclusion
      This is the first 4mm bit ratchet so far in this thread, and what an excellent one at that. The ratchet is wonderful, it works perfectly, it is as small as it gets, and the extension is also an excellent addition that elevates the kit in every way. There are also 36 bits, which cover a wide variety of fasteners. The price is truly amazing for what it offers.

      The case may be a little too wide for edc, and 4mm bits naturally are not as resilient as 1/4" bits. Plus, the specialty bits are arguably overkill for edc. It would have helped if the bits were double-ended. Then we would have had half as many bits, the case would have been smaller, and the weight would have been reduced.

      Still, for people who are looking for a 4mm bit ratchet to round out their edc, this is an excellent choice. Even for people looking for just the ratchet, this is still the one to get, since it comes with a great little extension, and is better value than the 711L one. The two ratchets are identical, cost about the same, but the 711L comes with two 4mm bits, whereas the Vessel is an entire kit.

      Pros
      -Excellent value for money.
      -Comprehensive 4mm bit selection.
      -Included extension improves comfort and reach.

      Cons
      -Ratchet inline driver and extension cannot drive double-ended bits.
      -Foam pieces should be glued.

      If you liked this ratchet, also check out:

      1 Reply Last reply
      • ReamerPunch Offline
        ReamerPunch
        Global Moderators
        Posts: 12,187
        ReamerPunch Offline
        ReamerPunch
        Global Moderators
        wrote on last edited by ReamerPunch
        #354 Quote Reply

          New Geinxurn mini ratchet. 2.5 inches in length, 72 teeth. The CROM and LaBear t-handle ratchets are 60 teeth. Standard 711L is 52 teeth. These are two inches long. Interesting. :think:
          Oh, boy. ::)

          1 Reply Last reply
          • Old Boy Offline
            Old Boy
            Posts: 1,107
            Old Boy Offline
            Old Boy
            wrote on last edited by
            #355 Quote Reply

              Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.

              I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?

              1 Reply Last reply
              • ReamerPunch Offline
                ReamerPunch
                Global Moderators
                Posts: 12,187
                ReamerPunch Offline
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #356 Quote Reply

                  @Old Boy said:
                  Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.

                  I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?

                  :cheers:

                  The 4mm bit ratchet is largely a luxury, a novelty. Like you say, you do not need a ratchet for tiny screws. 711L was the first to offer the 2" ratchet for regular bits, to appeal to the edc community. Short ratchet, ratchets that fit in the Leatherman bit driver, short t-handle ratchets, short folding ratchets, the designs kept coming. So 711L probably thought, "What else can we sell?", they saw the gap, and released the 4mm bit ratchet. It is functional, do not get me wrong, but it is mostly a novelty item, kinda like the ratcheting bit adapter.

                  This is the only other 4mm bit ratchet I have seen:

                  1 Reply Last reply
                  • Old Boy Offline
                    Old Boy
                    Posts: 1,107
                    Old Boy Offline
                    Old Boy
                    wrote on last edited by
                    #357 Quote Reply

                      Thanks ReamerP for saving my money.

                      1 Reply Last reply
                      • m47mu74nt Offline
                        m47mu74nt
                        Posts: 2,520
                        m47mu74nt Offline
                        m47mu74nt
                        wrote on last edited by
                        #358 Quote Reply

                          Quick 'n dirty review of the Real Avid X3 driver gunsmithing set :
                          [attach id=0 msg=2575890]

                          Stored in a fragile plastic case, it is quite compact, until the latch breaks (ask me how I know)
                          [attach id=1 msg=2575890]
                          [attach id=2 msg=2575890]
                          [attach id=3 msg=2575890]

                          Marketed by Real Avid as a gunsmithing set, it features a 1/4" ratchet and extension, and 13 bits oriented towards AR-15 and similar rifle maintenance:

                          HEX: 5/64", 3/32", 5/32", 3/16", 3.0MM, 4.0MM, 5.0MM
                          TORX®: T10, T15, T20, T25
                          PHILLIPS®: #1
                          FLAT: 5MM

                          real_avid_0.jpg

                          real_avid_1.jpg

                          real_avid_2.jpg

                          real_avid_3.jpg

                          1 Reply Last reply
                          • m47mu74nt Offline
                            m47mu74nt
                            Posts: 2,520
                            m47mu74nt Offline
                            m47mu74nt
                            wrote on last edited by
                            #359 Quote Reply

                              [attach id=0 msg=2575891]
                              [attach id=1 msg=2575891]

                              72 teeths Ratchet with 2 additional 1/4" holes, can be used alone or with the extension that can be either put in the ratchet head or in any of the two additional holes to make a "long screw driver" or a T-handle screw driver

                              [attach id=2 msg=2575891]
                              [attach id=3 msg=2575891]

                              As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.

                              • Tolerances are loose, the extension wobbles when plugged into the ratchet
                              • Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
                              • Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.

                              real_avid_4.jpg

                              real_avid_5.jpg

                              real_avid_6.jpg

                              real_avid_7.jpg

                              1 Reply Last reply
                              • m47mu74nt Offline
                                m47mu74nt
                                Posts: 2,520
                                m47mu74nt Offline
                                m47mu74nt
                                wrote on last edited by
                                #360 Quote Reply

                                  If I wasn't clear enough above : I do not recommend getting that set :oops:

                                  T-handle position compared to Facom T-handle position of the R.180
                                  [attach id=0 msg=2575894]

                                  real_avid_8.jpg

                                  1 Reply Last reply
                                  • ReamerPunch Offline
                                    ReamerPunch
                                    Global Moderators
                                    Posts: 12,187
                                    ReamerPunch Offline
                                    ReamerPunch
                                    Global Moderators
                                    wrote on last edited by ReamerPunch
                                    #361 Quote Reply

                                      Ratchets reviewed so far

                                      1 Reply Last reply
                                      • ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        Posts: 12,187
                                        ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        wrote on last edited by
                                        #362 Quote Reply

                                          @m47mu74nt said:
                                          As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.

                                          • Tolerances are loose, the extension wobbles when plugged into the ratchet
                                          • Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
                                          • Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.

                                          That is so unfortunate. It really does look like a premium set. I guess I'll drop it from my "to buy" list. Thanks. :salute:

                                          1 Reply Last reply
                                          • m47mu74nt Offline
                                            m47mu74nt
                                            Posts: 2,520
                                            m47mu74nt Offline
                                            m47mu74nt
                                            wrote on last edited by
                                            #363 Quote Reply

                                              It is really unfortunate!
                                              I was looking for some of their nicer/premium toolkits (like the torque limited bit set) but like wine, if the producer can't get to make a good entry level product, it is not advisable to even get their "top tier" product.

                                              I used the kit again today, and I may have been a bit harsh on the ratchet/extension as it does it's job correctly, but that plastic case really takes everything down.

                                              1 Reply Last reply
                                              • ReamerPunch Offline
                                                ReamerPunch
                                                Global Moderators
                                                Posts: 12,187
                                                ReamerPunch Offline
                                                ReamerPunch
                                                Global Moderators
                                                wrote on last edited by ReamerPunch
                                                #364 Quote Reply

                                                  WorkPro W002147A Mini Bit Ratchet

                                                  Weight: 54g
                                                  Bit set: 116g
                                                  Length: 105mm
                                                  Head width: 18mm
                                                  Head clearance with standard bit: 27mm (adds 2mm)
                                                  Teeth count: 72
                                                  Minimum swing arc: 5°
                                                  Bit retention: spring detent
                                                  In-line driver: no
                                                  Bit material: S2 steel
                                                  Handle material: Chromium-Vanadium steel
                                                  Price: $10 with 20 bits and two bit holders
                                                  8mm box wrench
                                                  Bits:
                                                  Phillips 0, 1, 2, 3
                                                  Allen 3, 4, 5, 6
                                                  Pozi 1, 2, 3
                                                  TamperProof Torx 10, 15, 20, 25, 30
                                                  Slotted 4, 5, 6
                                                  Square socket adapter

                                                  Accessories
                                                  The WorkPro mini ratchet comes with twenty bits and two rubber bit holders. The bits are made of S2 steel, which is nice to see in such an inexpensive set. They are well-made and fit their respective screws perfectly. The bit selection is great, with Allen, Pozi, even Tamperproof Torx and a square socket adapter, and no repeats. The ratchet is also available with an Imperial bit set.
                                                  The bit holders are the common rubber variety, but since this set does not come with a case, the holders are much appreciated.

                                                  Dimensions
                                                  At 54 grams, this is kind of chunky, but understandable considering the length. At 105mm long, this is definitely on the longer side of edc ratchets. The head is only 18 mm wide, which is great considering the teeth count.


                                                  Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

                                                  Teeth Count
                                                  This has 72 teeth, which is on the higher end of the spectrum. It has a 5 degree return angle, so it will be able to work even in very confined spaces.

                                                  Bit Retention
                                                  Bits are held in with a spring. This looks like the common spring of high end edc ratchets, like PrestaCycle, Topeak, etc, but it is not. The spring on the WorkPro is a little longer than it needs to be, so it can slide along the bit socket about 2 mm back and forth. It is also noticeably weaker. Bits are still held in firmly, and stubby bits are easy to remove.

                                                  Bit compatibility
                                                  Thanks to the hole in the head, the ratchet can be used with double-ended bits.
                                                  Stubby bits are easy to remove. Leatherman bits work perfectly as well.

                                                  Switch action
                                                  The switch is small, and tucked behind the knurled wheel. It does seem improbable that it would be bumped accidentally, but it feels a little loose.

                                                  Ease of use
                                                  The WorkPro ratchet has a comfortable four-finger grip, thanks to its length and flat body. With 72 teeth, it can turn fasteners in quite tight spaces.
                                                  The knurled thumb wheel makes quick work of somewhat loose fasteners. Although it is not as tight as on other ratchets, the knurled wheel cannot be operated with only a thumb or index finger. Because of the looseness of the ratcheting socket in the frame, it takes pinching it to make it turn, otherwise it is just pushed against one side of the frame and does not move.
                                                  The 8mm box wrench is useful for both Metric and Imperial fasteners, and can be used as a loop for attaching a cord to prevent loss.
                                                  The hole in the head allows for double-ended bits. It only adds a couple of mm to a bit's clearance.

                                                  Construction Quality
                                                  This may seem like another version of the high quality ratchets we have seen so far, like the PrestaCycle, BluckBurn, Topeak, etc. It is not. The switch has a lower detent, and the bit retention spring is weaker and a little ill-fitting on the bit socket. The ratchet mechanism has some play in the frame. This is a first so far. Many ratchets exhibit some wobble of the ratchet mechanism in the frame, but this feels a little loose. It still works properly and has not failed in the slightest, but the wobble does not inspire confidence, especially considering that it is absent in similar ratchets, and is much worse than even the most inexpensive ratchets reviewed so far.

                                                  The finish is consistent and crisp, and the bits are flawless.

                                                  Portability
                                                  Thanks to the 8mm box wrench end, the ratchet can be attached to other gear with large carabiners or cord. It will not fit in an Altoids tin but it will in edc pouches, or multi-tool sheath side-sleeves.

                                                  Value
                                                  Seeing how it only costs $10, it does seem like a good deal. It comes with 20 bits, two bit holders, and has some nice features.

                                                  Conclusion
                                                  On paper, the WorkPro mini ratchet seemed too good to be true and well, it is. The price is quite low, among the lowest so far. The features are there: 72 teeth, knurled thumb wheel, hole in the head, 8 mm box wrench, good ergonomics. It also comes with two bit holders and twenty flawless S2 bits, with a good bit selection and no bit repeats.
                                                  However, the quality feels a little lacking. The ratcheting socket, the bit retention spring, and the switch are all a little loose in the frame. Had corners been cut elsewhere, like bit amount, bit material, teeth count, this would have been an excellent choice for an inexpensive bit ratchet. Again, it has not failed in any way so far, and it may continue working perfectly and even outlast many ratchets of this thread. Let's just say that if it does fail in the near future, it will not be surprising. Is it recommended? Tough to say. It is very inexpensive, and for $10, it would be worth it just for the bits and bit holders.

                                                  Pros
                                                  -Very inexpensive.
                                                  -72 teeth, knurled wheel, hole in the head, 8mm box wrench.
                                                  -Excellent bit selection, with Allen, Tamperproof Torx, etc, and no repeats.
                                                  -Set comes in both Metric and Imperial.
                                                  -Good ergonomics.

                                                  Cons
                                                  -Lower quality compared to similar ratchets.

                                                  If you liked this ratchet, also check out:

                                                  1 Reply Last reply
                                                  • Farmer X Offline
                                                    Farmer X
                                                    Posts: 13,847
                                                    Farmer X Offline
                                                    Farmer X
                                                    wrote on last edited by
                                                    #365 Quote Reply

                                                      Bit ratchets could prove very useful for the business I plan on starting, so I'll have to review this thread as time permits. Thank you for keeping it going! :cheers:

                                                      1 Reply Last reply
                                                      • ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        Posts: 12,187
                                                        ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        wrote on last edited by ReamerPunch
                                                        #366 Quote Reply

                                                          Blue-Point BLPKSB004 Ratchet Set

                                                          (The ratchet can also be found branded by Granite, KS Tools, PowerTorque, Topeak.
                                                          Same size and basic design as Budnitz, Fortis, Katana, Rujoi, Signet, Sonic, and Smato)

                                                          Warranty: Lifetime
                                                          Max torque rating: 30 Nm / 22 ft lb
                                                          Weight: 29g
                                                          Set weight: 166g
                                                          Length: 93mm
                                                          Head width: 15mm
                                                          Head clearance with standard bit: 25.5mm (adds 0.5mm)
                                                          Teeth count: 52
                                                          Minimum swing arc: 7°
                                                          Bit retention: spring
                                                          In-line driver retention: magnet
                                                          Bit material: Chromium-Vanadium steel
                                                          Handle material: Chromium-Vanadium steel
                                                          Price: $33* with 20 bits and case
                                                          (price is average; no new stock exists; set is discontinued)
                                                          Bits:
                                                          Phillips: #1 x2, #2 x2,
                                                          Slotted: #4 x2, #5 x2, #6 x2
                                                          Pozidriv: #1 x2, #2 x2, #3 x2
                                                          Tamperproof Torx: 10/15/20/25

                                                          Accessories
                                                          The Blue-Point BLPKSB004 Ratchet comes with 20 bits and a case.
                                                          The bits are made of Chromium-Vanadium steel, and are highly polished.
                                                          The case is made of hard plastic, with proper hinges and a long, steel hinge pin. It is lined with foam and the bits and ratchet stay in by friction. The lid has a sticker with bit designations.

                                                          Other than branding, the ratchet is identical to the Topeak and Granite ratchets, reviewed in this thread previously.

                                                          Note that there are multiple versions of the BLPKSB004 Ratchet Set, all with different bit selections.

                                                          Dimensions
                                                          The Blue-Point ratchet is the same exact ratchet as the Topeak Ratchet Rocket and Granite Rock'n'Roll ratchet. 15mm wide head, 52 teeth, 93mm long, 29 grams heavy. Quite unobtrusive.


                                                          Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

                                                          Teeth Count
                                                          52 teeth for a 7 degree minimum swing. Quite good for a 15mm wide head.

                                                          Bit Retention
                                                          Same spring as the Topeak, Wera, Klein, etc. Retention is excellent.
                                                          The inline driver magnet is quite strong, so stubby bits with thin tips may require pliers to be removed.
                                                          The bits the ratchet comes with are so highly polished, that some are also quite hard to remove with just fingers.

                                                          Bit compatibility
                                                          Thanks to the hole in the head, the Blue-Point ratchet can use standard double-ended bits, Steinwhale stubby double-ended bits, and Leatherman bits. Regular and stubby bits have no issues.
                                                          Steinwhale stubby double-ended bits fit perfectly in the inline driver.
                                                          The inline driver cannot use standard double ended bits as they are too long to engage and be used.

                                                          Switch action
                                                          The action switch is small and has excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
                                                          The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.

                                                          Ease of use
                                                          The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
                                                          Stubby bits cannot be removed from the in-line driver easily.
                                                          Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
                                                          The included bits are quite highly polished, which makes them a little slippery.

                                                          The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform edc tasks.
                                                          The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
                                                          The high teeth count and knurled finger wheel make things quick.
                                                          Both bit driver sockets are funneled to make bit insertion easier.
                                                          The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.

                                                          Construction Quality
                                                          The included bits are quite highly polished, which helps with corrosion. They are finished flawlessly, as is the ratchet, which makes sense, as it is the identical ratchet branded by Granite and Topeak.

                                                          Portability
                                                          At 29 grams and 93mm long, the Blue-Point is on the small side of mini ratchets. It can sit comfortably in all sorts of pouches, pockets, pen sleeves, even tethered on gear with a clip through the hole in the head.
                                                          At 166 grams, the set is still rather lightweight, considering it has 20 bits.

                                                          The case is quite compact, but admittedly not the perfect size or shape for edc. The wallets similar ratchets come in, like Topeak, Granite, Blackburn, are all arguably better choices for edc. Still, there is nothing wrong with the Blue-Point case. It closes securely, it holds everything quite convincingly, and there is plenty of space for an extension and a few more bits and bobs.

                                                          Value
                                                          Being long discontinued complicates its value for money. It certainly is a nice set, with a high quality ratchet, 20 bits, a case, and arguably most importantly, lifetime warranty. All these will of course mean nothing if you cannot find it anywhere, but it does become available on various auction sites etc, although the price may fluctuate quite a lot.

                                                          Conclusion
                                                          It is no surprise that the Blue-Point BLPKSB004 Ratchet Set may seem familiar. It shares its ratchet with Topeak and Granite sets: same high quality, compact size, and features, different bit selection and case. If this proves too difficult to track down, and you are set on getting it, then a Granite, Topeak, Smato, Signet, Katana, etc set will offer a very similar experience, and you will probably save yourself some money.

                                                          It is still recommended, of course. It would not make much sense not to. This is an excellent little ratchet with many nice features, it comes with 20 bits and a case, and it has lifetime warranty. Though discontinued, it still shows up every now and then, and although it may be overpriced, you could get lucky and find a bargain.

                                                          Pros
                                                          -Lifetime warranty.
                                                          -Same dimensions, features, high quality, portability as Topeak ratchet.
                                                          -Multiple set versions.

                                                          Cons
                                                          -Hard to find.

                                                          If you liked this ratchet, also check out:

                                                          1 Reply Last reply
                                                          • ReamerPunch Offline
                                                            ReamerPunch
                                                            Global Moderators
                                                            Posts: 12,187
                                                            ReamerPunch Offline
                                                            ReamerPunch
                                                            Global Moderators
                                                            wrote on last edited by
                                                            #367 Quote Reply

                                                              Just in! :mail:
                                                              Hazet 2300SH-1
                                                              RockBros mini ratchet set

                                                              20260804_143940.jpg

                                                              1 Reply Last reply
                                                              • ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                Posts: 12,187
                                                                ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                wrote on last edited by ReamerPunch
                                                                #368 Quote Reply

                                                                  So, quick update. **The RockBros is going back. Do not buy it. **
                                                                  The ratcheting mechanism does not work properly. When set to tighten, it occasionally jams up and has to be jiggled free, only to bind up again.
                                                                  When set to loosen, it is almost permanently jammed, and does not work at all.

                                                                  1 Reply Last reply
                                                                  • Antti Lammi Offline
                                                                    Antti Lammi
                                                                    Global Moderators
                                                                    Posts: 8,716
                                                                    Antti Lammi Offline
                                                                    Antti Lammi
                                                                    Global Moderators
                                                                    wrote on last edited by
                                                                    #369 Quote Reply

                                                                      Well that sucks

                                                                      1 Reply Last reply
                                                                      • ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        Posts: 12,187
                                                                        ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        wrote on last edited by ReamerPunch
                                                                        #370 Quote Reply

                                                                          RockBros TG-T8008 mini ratchet set

                                                                          Weight: 32g
                                                                          Set weight: 158g
                                                                          Length: 95mm
                                                                          Head width: 20mm
                                                                          Head clearance with standard bit: 33mm (adds 8mm)
                                                                          Teeth count: 72
                                                                          Minimum swing arc: 5° (in theory)
                                                                          Bit retention: magnet
                                                                          Extension retention: magnet
                                                                          In-line driver retention: magnet
                                                                          Bit material: S2 steel
                                                                          Handle material: Aluminium alloy
                                                                          Price: $20 with 12 bits, extension, case, and drawstring pouch
                                                                          Bits:
                                                                          Phillips 1, 2
                                                                          Allen 2.5, 3, 4, 5, 6
                                                                          Torx 15, 20, 25, 30
                                                                          Slotted 4

                                                                          Accessories
                                                                          The RockBros TG-T8008 set consists of ratchet, extension, 12 bits, a holder, and a drawstring pouch.
                                                                          The bits are made of S2 steel and are highly polished. The extension is listed as aluminium alloy and has a magnet. The pouch is single-stitched and has two draw-strings.

                                                                          The holder is plastic. The ratchet attaches to the side, in a spot contoured for the ratchet's shape. The ratchet is flat, as opposed to the usual cylindrical body of most ratchets in this thread. The flat body allows the ratchet to enter its spot sideways, then twisting it 90 degrees makes it fit perfectly in there. The extension is stored while attached to the ratcheting end, so the lid that closes to secure everything captures the extension, preventing it and by extension the ratchet, from twisting. When closed, there is enough room in the lid for the ratchet to rattle left and right, but everything does seem to stay in the holder securely. Keep in mind that because the ratchet stays in the holder by shape, but not by friction/magnet/yokes, so if the lid is open, simply shaking the holder can make the ratchet fall out.

                                                                          The bits are held in two bit holders. Each bit is held in place with an individual neodymium magnet. These bit holders pivot out and can also twist around, although this seems to have little use. They do seem to be removable. There is a big hole in one corner that will fit large carabiners or cord for a lanyard, and there is a smaller hole on the bottom for a thinner lanyard or split-ring as well.

                                                                          Dimensions
                                                                          At 95mm, this is a little longer than average. Thanks to the Aluminium alloy, at 32 grams, it is quite lightweight for its length and width.
                                                                          The ratcheting end adds 8mm to a bit's clearance, which is a bit higher than average.
                                                                          The head is 20mm wide, which for 72 teeth would be fine, but it is not.


                                                                          Bottom right: 711L, Ares, Tone, Hazet 863MB, Engineer, PK Tool, RockBros, Neiko, Victorinox

                                                                          Teeth Count
                                                                          With 72 teeth, this, theoretically, has a minimum arc swing of 5 degrees. In reality, it has 20 degrees of slop before engaging the next tooth. This is the worst slop we have seen so far, and it almost rivals ratchets that have only 16 teeth.

                                                                          Bit Retention
                                                                          Bits are held in the ratchet, inline driver, and extension with magnets.

                                                                          Bit compatibility
                                                                          The ratcheting end and inline driver are extremely shallow for double-ended bits.
                                                                          The extension is deep enough for Steinwhale stubby double-ended bits.

                                                                          Switch action
                                                                          The switch is loose, sloppy, and switches the action between tightening and locked. More on that below.

                                                                          Ease of use
                                                                          More like "Difficulty of use" to be honest. Using this would have been straightforward: knurled wheel for quickly turning fasteners, 72 teeth for 5 degrees of minimum arc swing, inline driver.

                                                                          Unfortunately, using this ranges from average to impossible. The ratchet is sloppy, loosening does not work, the inline driver is bad, and the ratchet adds 8mm to a bit's clearance.


                                                                          Bottom left: the ratchet is set to tighten. It is able to hold up weight, since it is set to turn anticlockwise.
                                                                          Bottom right: it is set to loosen. It should not be able to hold any weight. It should have collapsed instantly. But it is bound.

                                                                          Construction Quality
                                                                          Construction quality is not good. This is probably the worst ratchet we have seen so far in this thread, and the only ratchet I have received, reviewed, and will send back.

                                                                          The ratcheting mechanism does not work. When set to tighten, the ratchet binds up occasionally and will unbind with a little jiggling only to jam again after a few teeth.
                                                                          When set to loosen, the ratchet is almost locked. It will only work if the switch is kept to the right and down with my thumb, which is less than ideal, and even then, the action is very crunchy, crude, and rough.

                                                                          As mentioned previously, the ratchet should have 5 degrees of minimum arc swing, but there is a 20 degree slop before the ratchet engages the next tooth.

                                                                          The inline driver is made crudely. Bits do not sink in completely, and therefore do not engage the magnet properly. Also when pulling out bits, metallic flakes are sometimes stuck on them.

                                                                          The knurled finger wheel is barely knurled. It requires a firm pinch to spin it.

                                                                          The ratchet has an almost mirror finish, but it covered in scratches and dents.

                                                                          The holder lid pivot pin protrudes from one side and can snag on fabric or skin.


                                                                          The ratchet is set to loosen. It should not be able to hold any weight.

                                                                          Portability
                                                                          The holder is a little bulkier than it could be. Still flat enough for a pocket.
                                                                          The ratchet weighs only 32g, so it would have been a nice, lightweight option.

                                                                          Value
                                                                          There is no value to speak of when the ratchet does not work as a ratchet. Do not buy this.

                                                                          Conclusion
                                                                          Well, here we are. It was only a matter of time to receive a ratchet that did not work out of the box.
                                                                          There are a few points that I wanted to make.
                                                                          The holder could be a little smaller. There is a 5mm gap between the bits' tips and the frame. This serves no purpose. The bit holders pivot out to make the bits accessible. There is also a gap between the extension's tip and the frame.
                                                                          The holder is also way over-engineered. There are many moving parts, that just add steps to using the tool. It also seems that were it to be dropped from any height, it would just disassemble into a plastic mess.
                                                                          The high polish of the ratchet makes it a little slippery and it collects fingerprints like no tomorrow.
                                                                          The ratcheting end protrudes a little from the frame so it will not sit perfectly flat in a pouch.
                                                                          Having a magnet for the ratcheting end makes it add 8mm to a bit's clearance, and with no hole in the head, it cannot use double-ended bits.
                                                                          At 32g, this is quite lightweight for its size. It would have been a nice, lightweight option that is still long enough for a comfortable grip and some torque, although the Aluminium alloy is certainly inherently weaker than Chromium-Vanadium.

                                                                          Alas, all those points are pointless. The ratchet does not work as a ratchet. That negates any positives it may have had. Even the worst ratchets before this worked as ratchets, which was supposed to be a given, but apparently not. Do not buy this.

                                                                          Pros
                                                                          -Able to be refunded.

                                                                          Cons
                                                                          -Ratcheting mechanism does not work when set to loosen.
                                                                          -Ratcheting mechanism binds constantly when set to tighten.
                                                                          -20° of slop before engaging next tooth.
                                                                          -Holder is much bulkier than it could be.

                                                                          If you liked this ratchet-shaped object, you probably skipped the text. Check these instead:

                                                                          1 Reply Last reply
                                                                          • ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            Posts: 12,187
                                                                            ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            wrote on last edited by ReamerPunch
                                                                            #371 Quote Reply

                                                                              Writing the Hazet 2300SH-1 review, and what do you know. Licensed by Wera. Nice. :D


                                                                              1 Reply Last reply
                                                                              • ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                Posts: 12,187
                                                                                ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                wrote on last edited by ReamerPunch
                                                                                #372 Quote Reply

                                                                                  Writing the Hazet 2300SH-1 review, so I got out the Wera Tool Check Plus 1 to compare things, and this happened. Let's see what Wera's warranty is like.

                                                                                  The Tool Check Plus 1 was delivered to me on 12-Oct-2025. I've had it for about 10 months, and the bit driver has been removed and put back maybe twenty times so far.


                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 15
                                                                                  • 16
                                                                                  • 17
                                                                                  • 18
                                                                                  • 19
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Reviews
                                                                                  4. EDC Bit Ratchets
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0