EDC Bit Ratchets
-
@ReamerPunch said:
Well, here we are. LaBear has released their own set of mini ratchet and extension. Identical to the CROM set, plus 5 bits in a tiny bit holder, and it costs less. I do not think I will get it, so I cannot 100% say that the LaBear is the same high quality of the CROM set, but it would appear that LaBear is the key-chain t-handle ratchet to beat.
Prices are USD

I've recently ordered the Geixern version of this, comes as a stubby ratchet in a metal tin, similar to the 711L product, hopefully the quality is good, the price was very reasonable, I paid £6 delivered on AliExpress.
The 711L mini ratchet on its own is £16 on Amazon and the Labear is £25.
Oh and while I'm posting, I double checked, Geinxurn ratchet wrench is actually 60 tooth, not 72.
-
@ReamerPunch said:
Also, I am reluctant to order from Amazon US for now. My latest order was opened en route and the items were stolen and replaced with a bed sheet, so I do not want it to happen again.
So sorry to hear that happened.
-
The Ares ratchet is getting recognised!

-

Vessel MR36 4mm bit ratchet set
(Ratchet can also be found branded by 711L)
Weight: 18g
Set weight: 214g
Length: 53mm
Head width: 14mm
Head clearance with standard 4mm bit: 29mm (adds 1mm)
Teeth count: 52
Minimum swing arc: 7°
Bit retention: spring detent
Extension retention: magnet
In-line driver retention: magnet
Bit material: S2 steel
Handle material: Chrome Vanadium steel
Price: $30 with 36 4mm bits, extension, case
Bits:
Phillips 000, 00, 00, 0, 0, 1, 2
Allen 0.89, 1.5, 2
Torx 2, 3, 4
TamperProof Torx 5, 6, 7, 8, 9, 10, 15
Slotted 1.5, 1.5, 2, 3, 4
Y 0.6, 1, 2, 2.5
Triangle 2, 2.3
U 2, 2.6
Pentalobe 1, 4
SIM ejector bitAccessories
The Vessel MR36 ratchet set consists of the ratchet, 36 4mm bits, an extension, a case, and two small foam pieces.
The bits are standard 4mm bits, and the selection is extensive. Along with Tamperproof Torx, Phillips, Allen, etc, we also have Y, U, Triangle, Pentalobe, even a SIM ejector bit. Bit material is S2 steel.
The extension is a welcome addition, and quite a rare sight, as it is of course for 4mm bits.
The case is slim. The lid is spring-loaded and releases with a slider. There is indexing so the lid will stay open at the angle it is left at. It also pivots to 270 degrees, so the case can stand with the bits upright at full display. The bits are held in by friction. There are no identifiers as to the bit designations on the case, so users will have to check the actual bits for their sizes. The ratchet and extension are stored connected. They are held in place by two yokes. This is not perfect, and the ratchet and extension can move left and right, which is why the two foam pieces are included. This case was made for the Vessel 9836 Precision Screwdriver Set, which has a 4mm driver handle instead of the ratchet and extension, and is used for this set to cut costs. With the foam pieces, the ratchet and extension seem fine when the case is closed, but these should have probably been glued in the case to keep them in place when the ratchet and extension are removed.
Dimensions
At 53mm, this is tiny, and it has an incredibly narrow head, at only 14mm wide. As the inline driver is for 4mm bits, it is of course much slimmer than other ratchets of similar length, that take 1/4" bits. This is also the lightest ratchet so far, at only 18 grams, ahead of the 711L ratchet at 19 grams and the CROM at 20 grams.
Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, VictorinoxTeeth Count
The Vessel ratchet has 52 teeth, which provide a 7 degree return angle. This is excellent, and currently it is the only option for 4mm bit ratchets, as the 711L 4mm ratchet is identical to this other than branding.Bit Retention
Bits are held in the ratchet with a spring. Retention is excellent and removing bits is extremely easy since 4mm bits are 28mm long.
In the inline driver and the extension, bits are held in with magnets. Retention is excellent.Bit compatibility
The ratchet driver has a hole in the backplate, so it can drive double-ended bits.
Sadly, the inline driver and extension are not deep enough for double-ended bits.
Regular 4mm bits are of course perfect, as the ratchet and extension were made to be used with those.
Switch action
The switch is tiny, tucked behind the head. No chance of triggering it accidentally.Ease of use
The Vessel mini ratchet has a knurled finger wheel, which is always nice to have. It has a hole in the head so it can drive double-ended bits if needed.
The extension is excellent for increasing reach for the bit, as well as extending the handle length, for more comfort. It is also ribbed to provide some more grip.
52 teeth provide a return angle of 7 degrees. The extension connected to the ratchet stands in for a bit driver handle.
The case stands upright making it easier to remove bits.The case does not have bit designations on it, so users will either have to eyeball the bit they need, or check the bits themselves for the one that is needed.
The foam pieces that act as spacers should be glued in the case, to keep them in place when using the ratchet.Note that the case has a warning against using the ratchet end with the extension connected to the inline driver. If you require more torque than this microscopic 4mm bit ratchet can provide, you need to get a larger ratchet. This is a precision set, not a persuasion set.

Construction Quality
The entire set is of high quality. The bits, extension, and ratchet are flawless. Everything looks crisp, properly finished, and everything works properly. The case is just plastic, nothing really spectacular, but it closes properly, and has proper hinges with steel pins. The indexing lid works for what it was designed for as well.
Portability
The ratchet is the most compact so far in this thread, and it seems hard to top, as it holds first place in quite a few lists: the narrowest head, at 14mm; the lightest, at 18 grams; among the shortest, at 53mm long; the narrowest inline driver, as it is for 4mm bits. This will disappear in any pocket or pouch, and for once, it is too small to go in a pen sleeve or multi-tool sheath side-sleeve. The head does have a hole, so it can be clipped on your keys, although it will require a very slim clip, and the bits will have to go in a pouch or something.The case is slim but quite wide. It will fit comfortably in a bag or pouch, but if you are thinking or carrying this for edc, maybe carry the ratchet and extension from this kit, and have bits in a secondary container, like a pen screwdriver, chap-stick tube, mini Tic-Tac box, etc.

Value
The Vessel MR36 offers excellent value for money. It is a comprehensive precision bit set, with 36 bits that include TamperProof Torx, U, Y, Triangle, etc. It also has a very handy extension that increases reach and comfort. And the star of the show, a tiny ratchet for 4mm bits. Despite its modest size, it is a proper, real ratchet; switch, inline driver, 52 teeth and all.It is even better when you consider that the identical ratchet can be found branded by 711L, and it is about the same price, but comes with only two 4mm bits and a small tin. Compared to that, the Vessel MR36 is a real 4mm bit toolbox.

Left to right: LaBear folding, Vessel, 711L, CROM, JacklyConclusion
This is the first 4mm bit ratchet so far in this thread, and what an excellent one at that. The ratchet is wonderful, it works perfectly, it is as small as it gets, and the extension is also an excellent addition that elevates the kit in every way. There are also 36 bits, which cover a wide variety of fasteners. The price is truly amazing for what it offers.The case may be a little too wide for edc, and 4mm bits naturally are not as resilient as 1/4" bits. Plus, the specialty bits are arguably overkill for edc. It would have helped if the bits were double-ended. Then we would have had half as many bits, the case would have been smaller, and the weight would have been reduced.
Still, for people who are looking for a 4mm bit ratchet to round out their edc, this is an excellent choice. Even for people looking for just the ratchet, this is still the one to get, since it comes with a great little extension, and is better value than the 711L one. The two ratchets are identical, cost about the same, but the 711L comes with two 4mm bits, whereas the Vessel is an entire kit.

Pros
-Excellent value for money.
-Comprehensive 4mm bit selection.
-Included extension improves comfort and reach.Cons
-Ratchet inline driver and extension cannot drive double-ended bits.
-Foam pieces should be glued.If you liked this ratchet, also check out:
-
New Geinxurn mini ratchet. 2.5 inches in length, 72 teeth. The CROM and LaBear t-handle ratchets are 60 teeth. Standard 711L is 52 teeth. These are two inches long. Interesting.

Oh, boy. ::)
-
Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.
I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?
-
@Old Boy said:
Hey, can someone educate me please in 4 mm bit ratchets? Not trolling but now considering in purchasing due to this wonderful thread.I get the 1/4" bit ratchet. But the only time I've ever used a 4 mm bit is for electronics, but never suffered through any wrist fatigue or exert a lot of torque to need ratchet. Is there a use case that would require a ratchet? Like IT or something where all you do is drive electronic bits?

The 4mm bit ratchet is largely a luxury, a novelty. Like you say, you do not need a ratchet for tiny screws. 711L was the first to offer the 2" ratchet for regular bits, to appeal to the edc community. Short ratchet, ratchets that fit in the Leatherman bit driver, short t-handle ratchets, short folding ratchets, the designs kept coming. So 711L probably thought, "What else can we sell?", they saw the gap, and released the 4mm bit ratchet. It is functional, do not get me wrong, but it is mostly a novelty item, kinda like the ratcheting bit adapter.
This is the only other 4mm bit ratchet I have seen:

-
-
Quick 'n dirty review of the Real Avid X3 driver gunsmithing set :
[attach id=0 msg=2575890]Stored in a fragile plastic case, it is quite compact, until the latch breaks (ask me how I know)
[attach id=1 msg=2575890]
[attach id=2 msg=2575890]
[attach id=3 msg=2575890]Marketed by Real Avid as a gunsmithing set, it features a 1/4" ratchet and extension, and 13 bits oriented towards AR-15 and similar rifle maintenance:
HEX: 5/64", 3/32", 5/32", 3/16", 3.0MM, 4.0MM, 5.0MM
TORX
: T10, T15, T20, T25
PHILLIPS
: #1
FLAT: 5MM



-
[attach id=0 msg=2575891]
[attach id=1 msg=2575891]72 teeths Ratchet with 2 additional 1/4" holes, can be used alone or with the extension that can be either put in the ratchet head or in any of the two additional holes to make a "long screw driver" or a T-handle screw driver
[attach id=2 msg=2575891]
[attach id=3 msg=2575891]As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.
- Tolerances are loose, the extension wobbles when plugged into the ratchet
- Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
- Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.




-
-
-
@m47mu74nt said:
As much as I found found the concept interesting, the resulting product is ... "Meh", considering the 45€ I could get it for.- Tolerances are loose, the extension wobbles when plugged into the ratchet
- Storage case is cool on paper but badly made: any time you close it you must make sure both shells are properly aligned and be careful not to break the latch
- Any other ratchet and bit set can answer the same market niche for a lower price or higher quality, or both: get a Facom, Wera, Usag, or whatever set you like and put the bit set your really need for your activity.
That is so unfortunate. It really does look like a premium set. I guess I'll drop it from my "to buy" list. Thanks.

-
It is really unfortunate!
I was looking for some of their nicer/premium toolkits (like the torque limited bit set) but like wine, if the producer can't get to make a good entry level product, it is not advisable to even get their "top tier" product.I used the kit again today, and I may have been a bit harsh on the ratchet/extension as it does it's job correctly, but that plastic case really takes everything down.
-

WorkPro W002147A Mini Bit Ratchet
Weight: 54g
Bit set: 116g
Length: 105mm
Head width: 18mm
Head clearance with standard bit: 27mm (adds 2mm)
Teeth count: 72
Minimum swing arc: 5°
Bit retention: spring detent
In-line driver: no
Bit material: S2 steel
Handle material: Chromium-Vanadium steel
Price: $10 with 20 bits and two bit holders
8mm box wrench
Bits:
Phillips 0, 1, 2, 3
Allen 3, 4, 5, 6
Pozi 1, 2, 3
TamperProof Torx 10, 15, 20, 25, 30
Slotted 4, 5, 6
Square socket adapterAccessories
The WorkPro mini ratchet comes with twenty bits and two rubber bit holders. The bits are made of S2 steel, which is nice to see in such an inexpensive set. They are well-made and fit their respective screws perfectly. The bit selection is great, with Allen, Pozi, even Tamperproof Torx and a square socket adapter, and no repeats. The ratchet is also available with an Imperial bit set.
The bit holders are the common rubber variety, but since this set does not come with a case, the holders are much appreciated.
Dimensions
At 54 grams, this is kind of chunky, but understandable considering the length. At 105mm long, this is definitely on the longer side of edc ratchets. The head is only 18 mm wide, which is great considering the teeth count.
Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, VictorinoxTeeth Count
This has 72 teeth, which is on the higher end of the spectrum. It has a 5 degree return angle, so it will be able to work even in very confined spaces.Bit Retention
Bits are held in with a spring. This looks like the common spring of high end edc ratchets, like PrestaCycle, Topeak, etc, but it is not. The spring on the WorkPro is a little longer than it needs to be, so it can slide along the bit socket about 2 mm back and forth. It is also noticeably weaker. Bits are still held in firmly, and stubby bits are easy to remove.Bit compatibility
Thanks to the hole in the head, the ratchet can be used with double-ended bits.
Stubby bits are easy to remove. Leatherman bits work perfectly as well.
Switch action
The switch is small, and tucked behind the knurled wheel. It does seem improbable that it would be bumped accidentally, but it feels a little loose.Ease of use
The WorkPro ratchet has a comfortable four-finger grip, thanks to its length and flat body. With 72 teeth, it can turn fasteners in quite tight spaces.
The knurled thumb wheel makes quick work of somewhat loose fasteners. Although it is not as tight as on other ratchets, the knurled wheel cannot be operated with only a thumb or index finger. Because of the looseness of the ratcheting socket in the frame, it takes pinching it to make it turn, otherwise it is just pushed against one side of the frame and does not move.
The 8mm box wrench is useful for both Metric and Imperial fasteners, and can be used as a loop for attaching a cord to prevent loss.
The hole in the head allows for double-ended bits. It only adds a couple of mm to a bit's clearance.
Construction Quality
This may seem like another version of the high quality ratchets we have seen so far, like the PrestaCycle, BluckBurn, Topeak, etc. It is not. The switch has a lower detent, and the bit retention spring is weaker and a little ill-fitting on the bit socket. The ratchet mechanism has some play in the frame. This is a first so far. Many ratchets exhibit some wobble of the ratchet mechanism in the frame, but this feels a little loose. It still works properly and has not failed in the slightest, but the wobble does not inspire confidence, especially considering that it is absent in similar ratchets, and is much worse than even the most inexpensive ratchets reviewed so far.The finish is consistent and crisp, and the bits are flawless.
Portability
Thanks to the 8mm box wrench end, the ratchet can be attached to other gear with large carabiners or cord. It will not fit in an Altoids tin but it will in edc pouches, or multi-tool sheath side-sleeves.
Value
Seeing how it only costs $10, it does seem like a good deal. It comes with 20 bits, two bit holders, and has some nice features.Conclusion
On paper, the WorkPro mini ratchet seemed too good to be true and well, it is. The price is quite low, among the lowest so far. The features are there: 72 teeth, knurled thumb wheel, hole in the head, 8 mm box wrench, good ergonomics. It also comes with two bit holders and twenty flawless S2 bits, with a good bit selection and no bit repeats.
However, the quality feels a little lacking. The ratcheting socket, the bit retention spring, and the switch are all a little loose in the frame. Had corners been cut elsewhere, like bit amount, bit material, teeth count, this would have been an excellent choice for an inexpensive bit ratchet. Again, it has not failed in any way so far, and it may continue working perfectly and even outlast many ratchets of this thread. Let's just say that if it does fail in the near future, it will not be surprising. Is it recommended? Tough to say. It is very inexpensive, and for $10, it would be worth it just for the bits and bit holders.
Pros
-Very inexpensive.
-72 teeth, knurled wheel, hole in the head, 8mm box wrench.
-Excellent bit selection, with Allen, Tamperproof Torx, etc, and no repeats.
-Set comes in both Metric and Imperial.
-Good ergonomics.Cons
-Lower quality compared to similar ratchets. -
-

Blue-Point BLPKSB004 Ratchet Set
(The ratchet can also be found branded by Granite, KS Tools, PowerTorque, Topeak.
Same size and basic design as Budnitz, Fortis, Katana, Rujoi, Signet, Sonic, and Smato)Warranty: Lifetime
Max torque rating: 30 Nm / 22 ft lb
Weight: 29g
Set weight: 166g
Length: 93mm
Head width: 15mm
Head clearance with standard bit: 25.5mm (adds 0.5mm)
Teeth count: 52
Minimum swing arc: 7°
Bit retention: spring
In-line driver retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $33* with 20 bits and case
(price is average; no new stock exists; set is discontinued)
Bits:
Phillips: #1 x2, #2 x2,
Slotted: #4 x2, #5 x2, #6 x2
Pozidriv: #1 x2, #2 x2, #3 x2
Tamperproof Torx: 10/15/20/25Accessories
The Blue-Point BLPKSB004 Ratchet comes with 20 bits and a case.
The bits are made of Chromium-Vanadium steel, and are highly polished.
The case is made of hard plastic, with proper hinges and a long, steel hinge pin. It is lined with foam and the bits and ratchet stay in by friction. The lid has a sticker with bit designations.Other than branding, the ratchet is identical to the Topeak and Granite ratchets, reviewed in this thread previously.
Note that there are multiple versions of the BLPKSB004 Ratchet Set, all with different bit selections.

Dimensions
The Blue-Point ratchet is the same exact ratchet as the Topeak Ratchet Rocket and Granite Rock'n'Roll ratchet. 15mm wide head, 52 teeth, 93mm long, 29 grams heavy. Quite unobtrusive.
Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, VictorinoxTeeth Count
52 teeth for a 7 degree minimum swing. Quite good for a 15mm wide head.Bit Retention
Same spring as the Topeak, Wera, Klein, etc. Retention is excellent.
The inline driver magnet is quite strong, so stubby bits with thin tips may require pliers to be removed.
The bits the ratchet comes with are so highly polished, that some are also quite hard to remove with just fingers.Bit compatibility
Thanks to the hole in the head, the Blue-Point ratchet can use standard double-ended bits, Steinwhale stubby double-ended bits, and Leatherman bits. Regular and stubby bits have no issues.
Steinwhale stubby double-ended bits fit perfectly in the inline driver.
The inline driver cannot use standard double ended bits as they are too long to engage and be used.
Switch action
The action switch is small and has excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.Ease of use
The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
Stubby bits cannot be removed from the in-line driver easily.
Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
The included bits are quite highly polished, which makes them a little slippery.The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform edc tasks.
The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
The high teeth count and knurled finger wheel make things quick.
Both bit driver sockets are funneled to make bit insertion easier.
The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.
Construction Quality
The included bits are quite highly polished, which helps with corrosion. They are finished flawlessly, as is the ratchet, which makes sense, as it is the identical ratchet branded by Granite and Topeak.Portability
At 29 grams and 93mm long, the Blue-Point is on the small side of mini ratchets. It can sit comfortably in all sorts of pouches, pockets, pen sleeves, even tethered on gear with a clip through the hole in the head.
At 166 grams, the set is still rather lightweight, considering it has 20 bits.The case is quite compact, but admittedly not the perfect size or shape for edc. The wallets similar ratchets come in, like Topeak, Granite, Blackburn, are all arguably better choices for edc. Still, there is nothing wrong with the Blue-Point case. It closes securely, it holds everything quite convincingly, and there is plenty of space for an extension and a few more bits and bobs.

Value
Being long discontinued complicates its value for money. It certainly is a nice set, with a high quality ratchet, 20 bits, a case, and arguably most importantly, lifetime warranty. All these will of course mean nothing if you cannot find it anywhere, but it does become available on various auction sites etc, although the price may fluctuate quite a lot.
Conclusion
It is no surprise that the Blue-Point BLPKSB004 Ratchet Set may seem familiar. It shares its ratchet with Topeak and Granite sets: same high quality, compact size, and features, different bit selection and case. If this proves too difficult to track down, and you are set on getting it, then a Granite, Topeak, Smato, Signet, Katana, etc set will offer a very similar experience, and you will probably save yourself some money.It is still recommended, of course. It would not make much sense not to. This is an excellent little ratchet with many nice features, it comes with 20 bits and a case, and it has lifetime warranty. Though discontinued, it still shows up every now and then, and although it may be overpriced, you could get lucky and find a bargain.

Pros
-Lifetime warranty.
-Same dimensions, features, high quality, portability as Topeak ratchet.
-Multiple set versions.Cons
-Hard to find.If you liked this ratchet, also check out:
-
Just in!

Hazet 2300SH-1
RockBros mini ratchet set
-
So, quick update. **The RockBros is going back. Do not buy it. **
The ratcheting mechanism does not work properly. When set to tighten, it occasionally jams up and has to be jiggled free, only to bind up again.
When set to loosen, it is almost permanently jammed, and does not work at all. -
Well that sucks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



















































